1 Power supply support bracket 2 Power supply release tab
8.Close the bezel.
9.Install the side cover (see “Installing the side cover” on page 134).
10.Lock the side cover.
11.Reconnect the external cables and power cords; then, turn on the attached devices and turn on the server.
Completing the installation
To complete the installation, you must install the bezel, install the side cover, and connect all the cables and, for certain options, run the Setup Utility. Follow the instructions in this section.
Closing the bezel
To close the bezel, do the following:
1.If you removed the bezel from the chassis, align the hinge assembly with the hinge holes on the chassis.
130ThinkServer TD200 Types 3724, 3808, 3809, 3815, 3817, 3824, 3826, 3836: Installation and User Guide
