Rear view
The following illustration shows the LEDs and connectors on the rear of the server.
1 | Power cord connector | 10 | USB 1 |
2 | Ethernet transmit/receive | 11 | Ethernet 1 10/100/1000 |
| activity LED |
|
|
3 Ethernet link status LED | 12 | NMI button | |
4 | Ethernet transmit/receive | 13 | |
| activity LED |
|
|
5 Ethernet link status LED | 14 | Video | |
6 | Ethernet 2 10/100/1000 | 15 Serial 1 (COM 1) | |
7 | USB 4 | 16 | Fault (error) LED |
8 | USB 3 | 17 | ac power LED |
9 | USB 2 | 18 | dc power LED |
Power-cord connector
Connect the power cord to this connector.
ac power LED
This green LED provides status information about the power supply. During typical operation, both the ac and dc power LEDs are lit. For any other combination of LEDs, see the Hardware Maintenance Manual.
dc power LED
This green LED provides status information about the power supply. During typical operation, both the ac and dc power LEDs are lit. For any other combination of LEDs, see the Hardware Maintenance Manual.
26ThinkServer TD200 Types 3724, 3808, 3809, 3815, 3817, 3824, 3826, 3836: Installation and User Guide
