![](/images/new-backgrounds/1102913/102913303x1.webp)
5.Lock the side cover.
6.Reconnect the external cables and power cords; then, turn on the attached devices and turn on the server.
Installing the side cover
If you removed the side cover, reinstall it.
Attention: For proper cooling and airflow, replace the side cover before turning on the server. Operating the server for extended periods of time (more than 30 minutes) with the side cover removed might damage server components.
To install the side cover, do the following:
1 | Cover release latch |
2 | Lock |
3 |
To reinstall the side cover, do the following:
1.Make sure that all cables, adapters, and other components are installed and seated correctly and that you have not left loose tools or parts inside the server. Also, make sure that all internal cables are correctly routed.
2.Insert the bottom edges of the cover onto the inside lip of the chassis and rotate the cover toward the server.
3.Press down on the
4.Lock the side cover.
Note: When you lock the server side cover, it locks both the cover and the bezel.
Connecting the cables
Attention: To prevent damage to equipment, connect the power cords last.
134ThinkServer TD200 Types 3724, 3808, 3809, 3815, 3817, 3824, 3826, 3836: Installation and User Guide