Lenovo 3724, 3836, 3809, 3826, 3824, 3808, 3815, 3817 manual Removing the front USB connector assembly

1 Power supply support bracket 2 Power supply release tab

5.Install the side cover (see “Installing the side cover” on page 134).

6.Lock the side cover.

7.Reconnect the external cables and power cords; then, turn on the attached devices and turn on the server.

Removing the front USB connector assembly

To remove the front USB connector assembly, do the following:

1.Read the safety information (see “Safety” on page vii and “Installation guidelines” on page 37).

2.Turn off the server and all attached devices; then, disconnect all power cords and external cables.

3.Unlock and remove the side cover (see “Removing the side cover” on page 43).

4.Rotate the power-supply cage assembly out of the chassis. Lift up the power-supply cage handle and pull the power-supply cage assembly all the way up until the retainer latch locks the cage in place on the chassis.

Chapter 5. Installing optional devices and replacing customer replaceable units 49