Lenovo 3824, 3836, 3809, 3826, 3724, 3808, 3815, 3817 Installing a 3.5-inch hot-swap hard disk drive

1 Hot-swap hard disk drive 2 Drive tray

3 Drive tray handle (in open position)

6.If you are instructed to return the 3.5-inch hot-swap hard disk drive, follow all packaging instructions, and use any packaging materials that are supplied to you for shipping.

Installing a 3.5-inch hot-swap hard disk drive

Before installing a 3.5-inch hot-swap hard disk drive, read the following information:

vThe 3.5-inch hot-swap drives must be either all SAS hard disk drives or all SATA hard disk drives; do not mix SAS and SATA drives.

vInspect the drive tray for signs of damage.

vTo maintain proper system cooling, do not operate the server for more than 10 minutes without either a drive or a filler panel installed in each drive bay.

vYou do not have to turn off the server to install hot-swap drives in the hot-swap drive bays.

To install a 3.5-inch hot-swap hard disk drive, do the following:

1.Remove the EMC shield, if one is present.

2.Touch the static-protective package that contains the drive to any unpainted metal surface on the server; then, remove the drive from the package and place it on a static-protective surface.

3.Make sure that the drive tray handle is in the open position.

4.Align the drive assembly with the guide rails in the bay; then, carefully slide the drive assembly into the drive bay until the drive snaps into place.

1 Hot-swap hard disk drive 2 Drive tray

3 Drive tray handle (in open position) 4 EMC shield

5. Rotate the drive tray handle to the closed position.

74ThinkServer TD200 Types 3724, 3808, 3809, 3815, 3817, 3824, 3826, 3836: Installation and User Guide