Lenovo 3836, 3809, 3826, 3724, 3824, 3808, 3815, 3817 manual 2 Retaining clip

8. Turn the DIMM so that the DIMM keys align correctly with the connector.

1 DIMM

2 Retaining clip

9.Insert the DIMM into the connector by aligning the edges of the DIMM with the slots at the ends of the DIMM connector. Firmly press the DIMM straight down into the connector by applying pressure on both ends of the DIMM simultaneously. The retaining clips snap into the locked position when the DIMM is firmly seated in the connector. If there is a gap between the DIMM and the retaining clips, the DIMM has not been correctly installed. Open the retaining clips, remove the DIMM, and then reinsert it.

10.Install the air baffle (see “Installing the air baffle” on page 132).

11.Rotate the power-supply cage assembly back into the server. Press the power-supply cage release tab and rotate the power-supply cage assembly into the chassis.

94ThinkServer TD200 Types 3724, 3808, 3809, 3815, 3817, 3824, 3826, 3836: Installation and User Guide