Lenovo 3815, 3836, 3809 Reset IMM to Defaults, System Security, Adapters and Uefi Drivers, Network

specify whether to use the static IP address or have DHCP assign the IMM IP address; save the network changes.

-Reset IMM to Defaults

Select this choice to view or reset IMM to the default settings.

-Reset IMM

Select this choice to reset IMM.

–System Security

Select this choice to view or configure Trusted Platform Module (TPM) support.

–Adapters and UEFI Drivers

Select this choice to view information about the UEFI 1.10 and UEFI 2.0 compliant adapters and drivers installed in the server.

–Network

Select this choice to view or configure the network device options, such as iSCSI, PXE, and network devices.

Note: The configuration forms for UEFI 2.1 and greater compliant add-on network devices might be located here.

v Date and Time

Select this choice to set the date and time in the server, in 24-hour format (hour:minute:second).

This choice is on the full Setup Utility menu only.

vStart Options

Select this choice to view or boot to devices, including the startup sequence. The server starts from the first boot record that it finds.

This choice is on the full Setup Utility menu only.

vBoot Manager

Select this choice to view, add, delete, or change the device boot priority, boot from a file, select a one-time boot, or reset the boot order to the default setting.

vSystem-event Logs

Select this choice to enter the System Event Manager, where you can view the error messages in the system event logs. You can use the arrow keys to move between pages in the error log.

The system-event logs contain all event and error messages that have been generated during POST, by the systems-management interface handler, and by the system-service processor. Run the diagnostics programs to get more information about error codes that occur. See the Hardware Maintenance Manual for instructions for running the diagnostics programs.

Important: If the system-error LED on the front of the server is lit but there are no other error indications, clear the IMM system-event log. Also, after you complete a repair or correct an error, clear the IMM system-event log to turn off the system-error LED on the front of the server.

–POST Event Viewer

Select this choice to enter the POST event viewer to view the POST error messages.

–System-event Log

Select this choice to view the IMM system-event log.

–Clear System-event Log

Select this choice to clear the IMM system-event log.

140ThinkServer TD200 Types 3724, 3808, 3809, 3815, 3817, 3824, 3826, 3836: Installation and User Guide