Lenovo 3815, 3836, 3809, 3826, 3724, 3824, 3808, 3817 manual

11.Remove the fan cage assembly (see “Removing the fan cage assembly” on page 46).

12.Connect the configuration signal cable. See “Power and signal cables for internal drives” on page 78 for information about cabling the power and signal cables.

13.Complete the cabling of the ServeRAID-BR10i SAS/SATA adapter.

v For the eight drive-bay, 2.5-inch server model, connect one end of the signal cable to the drive backplane for drive bays 0 through 3 and route the other end through the plastic slot on the bottom of the chassis underneath the front fan cage; then, connect it to the ServeRAID-BR10i SAS/SATA controller as shown in the following illustrations:

1 Signal cable for drives 0-3

2 Adapter connector for drives 0-3 signal cable

The following illustration shows the connectors on the controller to which you connect the signal cables from the drive backplanes.

1 ServeRAID-BR10i controller

2 Adapter connector for drives 0-3 signal cable 3 Adapter connector for drives 4-7 signal cable

Connect one end of the other signal cable to the drive backplane for drive bays 4 through 7 and route the other end of the cable through the plastic

108ThinkServer TD200 Types 3724, 3808, 3809, 3815, 3817, 3824, 3826, 3836: Installation and User Guide