1 Adapter connector for drives
The following illustration shows the connectors on the controller to which you connect the signal cables from the drive backplanes.
1
2 Adapter connector (J9) for drives
Connect one end of the other signal cable to the drive backplane for drive bays 4 through 7 and route the other end of the cable through the plastic slots on the bottom of the chassis underneath the fan cage assembly; then, connect it to connector J9 on the
122ThinkServer TD200 Types 3724, 3808, 3809, 3815, 3817, 3824, 3826, 3836: Installation and User Guide
