Important for the United Kingdom
Thismachine is fitted with an approved moulded 13 Amp plug.
Tochange a fuse in this type of plug, please follow these
instructions.
aTakeoff the fuse cover and take out the fuse.
bPutin a new fuse which should be a BS1362 3A, A.S.T.A.
orBSI approved type.
cRefitthe fuse cover.
Ifthe plug fitted is not suitable for your socket, cut it off and fit
anothertype.
Ifthe plug you fit contains a fuse, it should be a3Amp fuse. If
youfit a plug which does not need a fuse, make sure the fuse
onyour fuse box is not greater than 5 Amps.
DNote:Please destroy the plug you have cut off so
thatit cannot be used in a 13 Amp socket
somewhereelse.
Howto connect a plug
Thewires in the lead from the video recorder are coloured as
follows.
*Blue - ’neutral’ (’N’).
*Brown - ’live’ (’L’).
dConnectthe blue wire to the terminal in the plug which is
markedwith the letter ’N’ or coloured black.
eConnectthe brown wire to the terminal in the plug which
ismarked with the letter ’L’ or coloured red.
fDonot connect either of the wires to the terminal in the
plugwhich is marked with the letter ’E’, the symbol \or
colouredgreen or green and yellow.
Beforeyou refit the plug cover, make sure that the grip at the
bottomof the plug is clamped over the plastic cover of the
lead,not just over the two wires.
How to connect your video recorder to the
TV set
Werecommend the use of a scart cable. This will give you the
bestpicture and sound quality.
Whenyou install your video recorder for the first time, please
read:
EIfyour TV set has a scart socket and you are using a
scartcable, please read the section ’Connecting with a
scartcable’.
EThesection ’Connecting without a scart cable’, if you are
notusing a scart cable.
Connecting with a scart cable
aSwitchoff the TV set.
bRemovethe aerial cable plug from your TV set and insert
itinto the 2socketat the back of the video recorder.
cPlugone end of the aerial cable provided into the 3
socketon the video recorder and the other end into the
aerialinput socket on your TV set.
dPlugone end of the scart cable into the EXT.1 AV 1 scart
socketat the back of the video recorder and the other
endinto the scart socket on your TV set (see instruction
manualTV set).
eSwitchon the TV set.
1. HOW TO CONNECT YOUR VIDEO RECORDER4