Initial installation

aOpenup the battery compartment of yourremote control
andplace the batteries in it as shown in the picture.
bClosethe battery compartment.
cConfirmthe picture on the TV screen with the OK button
onthe remote control.
dIfyou have connected the aerial to the video recorder,
pressthe OK button.’Autoinstall’ starts. This picture will
appearon the screen:
AUTOINSTALL 00
Waituntil all TV channels have been found. This can take
severalminutes.
eWhen’AUTOINSTALL’ is complete, ’READY’ will appear
onthe TV screen.
DIfthe autoinstall procedure is interrupted by the
standbybutton, press the MENU button to obtain the
welcomescreen again.
fToend, press the MENU button.
Theinitial installation is now complete.
Checkthe time and date. Please read ’Setting the time
anddate’ in this chapter.
DIfyou have connected a decoder, you must install it
asdescribed in the next section.
DIfyou have connected a satellite receiver, please
readthe section ’satellite receiver’.

Allocating a decoder

SomeTV stations will send coded TV channels, that you can
onlywatch when you use a decoder. You can connect such a
decoder(descrambler) to your video recorder. With the
followingfunction, the connected decoder will automatically
beactivated for the TV programme you want to watch.
aSwitchon the TV set. If required, select the programme
numberfor the video recorder.
bChoosethe television channel on which you wish to use
thedecoder with the Pqor Prbuttonson the video
recorderor the number buttons 0-9 onthe remote
control.
cPressthe MENU buttonon the remote control. The main
menuwill appear.
dSelectthe line ’MANUAL SEARCH’ with the Pqor
Prbutton.
eConfirmwith the OK button.
fPressthe INDEXEbutton. ’DEC’ will appear in the
display.
CH21
gConfirmwith the OK button.
hToend, press the OK buttonagain. Then, press the
TV/STANDBYmbutton.
Thischannel is now assigned to the decoder.

Manual TV channel search

Incertain cases the ’Automatic TV channel search’ may not be
ableto find all of the TV channels (e.g. coded TV channels). In
thatcase, use this manual method to set the channels.
DWhenyou search for TV channels manually, you can
choosebetween the indication for ’channel’ or
’frequency’.Please read the next paragraph
’Channelnumber or frequency display’.
aSwitchon the TV set. If required, select the programme
numberfor the video recorder.
2. INSTALLING YOUR VIDEO RECORDER
6