fConfirmwith the OK buttonon the video
recorder-remotecontrol. The video recorder compares
theTV channels on the TV set and the video recorder.
Ifthe video recorder found the same TV channel as the
TVset, then it stores it at ’P01’.
DWhen’NOTV’ (no signal from TV set) appears in the
display,the TV channels can not be allocated
automatically.In this case, read ’Manual TV channel
allocation’.
gWaituntil, for example, ’TV02’ appears.
hSelectthe next programme number, for example, ’2’ on
theTV set.
iConfirmwith the OK buttonon the video
recorder-remotecontrol.
DIfyou allocated the wrong TV channeL, you can go
backone step with the CLEAR(CL), ybutton.
jRepeatsteps gto iuntil all TV channels have been
allocated.
kToend, press the TV/STANDBY mbutton.
Automatic TV channel search (Autoinstall)
Thevideo recorder will search for all TV channels. It stores TV
channelsfound in the following sequence: BBC 1, BBC 2, ITV,
CH4, CH 5, SKY, others.
DIfyou want to start the automatic TV channel search
again,then follow the instructions below.
aSwitchon the TV set. If required, select the programme
numberfor the video recorder.
bPressthe MENU buttonon the remote control. The main
menuwill appear.
cSelectthe line ’AUTOINSTALL’ with the Pror
Pqbutton.
dPressthe OK button.The ’Automatic TV channel search’
starts.
AUTOINSTALL 00
Waituntil all TV channels have been found. This can take
severalminutes.
eWhenAutoinstall is complete, ’READY’ will appear on the
display.
Thetime and date information have been set.
Howto search for a TV channel manually, you can read in the
section’Manual TV channel search’.
Monitor function
Youcan switch backwards and forwards between TV picture
andvideo recorder picture with the MONITOR button. But this
onlyworks when you use a scart cable to connect the video
recorderto your TV set and if your TV set responds to this
switch-over.
Sorting and clearing TV channels manually
Youcan assign any programme number to a TV channel that
youhave stored and you can also delete unwanted TV
channels.
aSwitchon the TV set. If required, select the programme
numberfor the video recorder.
bPressthe MENU buttonon the remote control. The main
menuwill appear.
cSelectthe line ’CHANNEL ALLOCATION’ with Pror
Pqbuttonand confirm with the OK button.
P01 CH26
------------------------
-/+ CL OK
dWiththe Pror Pqbutton,select the TV channel to
whichyou want to give a programme number (starting
with’P01’).
eConfirmwith the OK button.
DIfyou want to delete a TV channel, press the
CLEAR(CL), ybutton.
fRepeatsteps dto euntil you have given a programme
numberto all TV channels.
gToend, press the TV/STANDBY mbutton.
8