Philips VRA651, VRA451 Setting Up the VCR Plus+ Programming System cont’d, Examine the lists 2on

Setting Up the VCR Plus+ Programming System (cont’d) 33

2

Now, compare the channel numbers you have written into the VCR PLUS+ CH. and CABLE/TV CH. columns. You’ll notice that some stations have VCR Plus+ and Cable/TV channel numbers that are the same, and other stations have channel numbers that do not match. You must tell the VCR the VCR Plus+ and Cable/TV channel numbers according to the following steps.

3

Press the VCR button, then press the MENU button.

4

Press the PLAY 8 or STOP 9 button to select INITIAL SET UP, then press the FF :/OK button.

5

Press the PLAY 8 or STOP 9 button to select VCR PLUS+ CH., then press the FF :/OK button.

SET VCR PLUS+ CH.

VCR PLUS+		CABLE/TV
99		– – –
01	– – – –>	– – –
02		– – –
03		– – –

04– – –

SELECT ,9 OR ENTER VCR+ CH. NO. THEN PUSH >/OK

TO END PUSH EXIT

6

While a VCR Plus+ channel is flashing, press the PLAY 8 or STOP 9 button repeatedly or press the Number but- tons so that the arrow appears beside the VCR Plus+ channel number you need.

Press the FF :/OK button.

Examine the lists
2on page 32.
			3
CBL / DBS		TV		VCR
VCR/TV		POWER		EJECT
QUICK PROGRAMMING					6-7
1	+	2	+	3
DBS		DAILY	............. WEEKLY
START		STOP		DATE
4	-	5	-	6
7		8		9
SPEED		0		CLEAR
	STILL/SLOW
....		.......		. +
- ....					4-7
REW				/OK
				FF
		PLAY
		STOP			3
VOL		MENU		CH
	EXIT/STATUS
		TIMER			8
SKIP SEARCH		INDEX		AUDIO/MUTE
SMARTPICTURE				REC /OTR

7

While the space for the Cable/TV channel is flashing, press the PLAY 8 or STOP 9 button repeatedly or press the Number buttons to enter the Cable/TV channel num- ber from the list on page 32. Press the FF :/OK button. Repeat steps 6-7 until you have entered all the channels on your list.

●If you are using a Cable Box/DBS, the Cable/TV chan- nel will be 3 or 4 (the Cable Box/DBS output channel) for every VCR Plus+ channel. You must set the Cable Box/DBS to the channel you want to record; leave the Cable Box/DBS on for the timer recording.

8

Press the EXIT/STATUS button.