Recording One Channel/Watching Another | Philips VRA601AT instruction

26 Recording One Channel/Watching Another

1

Press the REC(ord)/OTR button to start a recording of the current channel. (See page 25.)

2

Press the VCR/TV button to put the VCR in TV position. The VCR/TV light will disappear from the VCR’s display panel.

3

Use the TV remote control to select the channel you want to watch at the TV.

4

To return to the channel being recorded, use the TV remote control to select channel 03 or 04 at the TV

(whichever channel the CH3/CH4 switch on the back of the VCR is set to).

5

Press the VCR/TV button to put the VCR in VCR posi- tion. The VCR/TV light will appear on the display panel. The channel being recorded will appear on the screen.

6

Press the STOP/p button to stop the recording.

2&5

	POWER		VCR/TV	EJECT
	1	2	3
	4	5	6
	7	8	9	CHANNEL
	7	8	9
		0
	SPEED	TIME SEARCH		MEMORY
	MENU	STATUS/EXIT	CLEAR	SLOW
1	REWIND	/PLAY		F.FWD
1	REC/OTR	/STOP		PAUSE/STILL
6

3

4

Select the channel you want to watch at the TV.

Select channel 03 or 04 at the TV.

Helpful Hint

•If you use a Cable Box or Direct Broadcast System hookup, you may not be able to watch one channel while recording another. See pages eight-nine for details.

Image 26

Philips VRA601AT owner manual Recording One Channel/Watching Another

Contents

VRA601AT This bolt of lightning indi- cates uninsulated material Dear Philips Magnavox product ownerFor Customer Use Model No Serial No Introduction FeaturesSafety Precautions Table of Contents VCR maintenance Before Using Your VCRPutting Batteries in the Remote Control Removing the Plastic Cover from the Front Panel Hookups Without a Cable Box/Direct Broadcast System Disconnect the antenna or cable from your TV Hookups Without a Cable Box/Direct Broadcast System cont’d Plug in the TV and the VCR Recording/Viewing Any Channel Hookups With a Cable Box/Direct Broadcast SystemConnections Recording One Channel/Watching Another TV’s Antenna Hookups With a Stereo TV Video Cable Press the Menu button. The display shown below will appear Turning on Your VCR2Turn on the TV Automatic Channel Setup Press the Menu button Automatic Channel Setup cont’d Adding/Deleting Channels Reviewing Memorized Channels Press the STATUS/EXIT button once or twice to exit Follow the steps below to set your VCR’s clock. Make sure You make each entry within 60 seconds of the previous entry Daylight-Savings Time Language Selection Remote Control Buttons Press to eject the tape Remote Control Buttons cont’dEject Button Clear Button If you select Status ON, then select Counter only on On-Screen Status DisplaysStatus Display example only If you select Status ON, then select Counter only OFF VCR Display Panel Front Panel Rear Panel 1Turn on the TV 2Insert a tape in the VCR PlayingRead and follow the steps below to play a tape RECord light will appear RecordingInsert a tape with its record tab intact in the VCR Recording One Channel/Watching Another One-Touch Recording Daily Timer RecordingDo each step within 60 seconds of the previous step Timer Recording cont’d Timer Recording cont’d Tape Speeds Checking or Cancelling Timer Recordings Rerecording Tape Duplication RF coaxial cable Press the F.FWD/B button so that on appears beside Repeat PlayPress the PLAY/o button or the STOP/p button to select Real-Time Counter Memory Time Search Press the Time Search button Super High Speed Searching LP/SLP Special Effects PlaybackForward and Reverse Searching SP/LP/SLP Viewing a Still Picture Automatic Operation Features Specifically… Multi-Channel Television Sound SystemUnderstanding On-Screen Displays Monitor Multi-Channel Television Sound System cont’d Hi-Fi Stereo Sound System Please see additional notes on Hi-Fi Stereo Sound System cont’dHIFI. on will appear to the right of Hifi on the screen Helpful Hints Helpful Hints cont’d Glossary Cable Box/DBS Output Channel 03 or Specifications Limited Warranty Model # Serial # Timer PowerRemote control Automatic Supplied Accessories