Hookups With a Stereo TV, Video Cable | Philips VRA601AT manual

10 Hookups With a Stereo TV

			antenna or
			1 ANT(enna)cable to
AUDIO		ANT	IN Jack
	L	IN
OUT	IN
	R
VIDEO		OUT
OUT	IN	CH3 CH4
OUT	IN
VIDEO (yellow) and		2
AUDIO (red and white)			Video Cable
OUT Jacks			Video Cable
OUT Jacks

Audio and Video IN Jacks on TV

● Audio and Video cables are not supplied. 3 Audio Cable

1

Connect the antenna or cable to the ANT(enna) IN Jack on the back of the VCR.

2

Connect a video cable to the yellow VIDEO OUT Jack on the back of the VCR. Then, connect the other end of the video cable to the VIDEO IN Jack on your TV.

3

Connect audio cables to the red and white AUDIO OUT Jacks on the back of the VCR. Then, connect the other end of the audio cables to the AUDIO IN Jacks on your TV.

4

Turn on your TV, making sure it is in Line Input mode. Please refer to your TV owner’s manual for details.

Helpful Hints

• A stereo audio cable (not supplied) is used here to deliver audio to the TV’s left and right channels.

• The TV must be in Line Input mode. Please refer to your TV owner’s manual.

Image 10

Philips VRA601AT owner manual Hookups With a Stereo TV, Video Cable

Contents

VRA601AT This bolt of lightning indi- cates uninsulated material Dear Philips Magnavox product ownerFor Customer Use Model No Serial No Safety Precautions FeaturesIntroduction Table of Contents VCR maintenance Before Using Your VCRPutting Batteries in the Remote Control Removing the Plastic Cover from the Front Panel Hookups Without a Cable Box/Direct Broadcast System Disconnect the antenna or cable from your TV Hookups Without a Cable Box/Direct Broadcast System cont’d Plug in the TV and the VCR Connections Hookups With a Cable Box/Direct Broadcast SystemRecording/Viewing Any Channel Recording One Channel/Watching Another TV’s Antenna Hookups With a Stereo TV Video Cable 2Turn on the TV Turning on Your VCRPress the Menu button. The display shown below will appear Automatic Channel Setup Press the Menu button Automatic Channel Setup cont’d Adding/Deleting Channels Reviewing Memorized Channels Press the STATUS/EXIT button once or twice to exit Follow the steps below to set your VCR’s clock. Make sure You make each entry within 60 seconds of the previous entry Daylight-Savings Time Language Selection Remote Control Buttons Press to eject the tape Remote Control Buttons cont’dEject Button Clear Button If you select Status ON, then select Counter only on On-Screen Status DisplaysStatus Display example only If you select Status ON, then select Counter only OFF VCR Display Panel Front Panel Rear Panel Read and follow the steps below to play a tape Playing1Turn on the TV 2Insert a tape in the VCR Insert a tape with its record tab intact in the VCR RecordingRECord light will appear Recording One Channel/Watching Another One-Touch Recording Do each step within 60 seconds of the previous step Timer RecordingDaily Timer Recording cont’d Timer Recording cont’d Tape Speeds Checking or Cancelling Timer Recordings Rerecording Tape Duplication RF coaxial cable Press the PLAY/o button or the STOP/p button to select Repeat PlayPress the F.FWD/B button so that on appears beside Real-Time Counter Memory Time Search Press the Time Search button Super High Speed Searching LP/SLP Special Effects PlaybackForward and Reverse Searching SP/LP/SLP Viewing a Still Picture Automatic Operation Features Specifically… Multi-Channel Television Sound SystemUnderstanding On-Screen Displays Monitor Multi-Channel Television Sound System cont’d Hi-Fi Stereo Sound System HIFI. on will appear to the right of Hifi on the screen Hi-Fi Stereo Sound System cont’dPlease see additional notes on Helpful Hints Helpful Hints cont’d Glossary Cable Box/DBS Output Channel 03 or Specifications Limited Warranty Model # Serial # Timer PowerRemote control Automatic Supplied Accessories