Setting the Clock (cont’d) 17
Automatic Clock Setting
1
Press the VCR button, then press the MENU button.
SELECT op CHOOSE B
→PROGRAM VCR SET UP TUNER SET UP
4 | POWER |
| EJECT |
VCR/TV | SPEED | MEMORY | |
| REC/OTR |
| PAUSE/STILL |
SET CLOCK
REMOTE LOCATOR
TO END PUSH EXIT
3
REW
PLAY
F.FWD
STOP
2
Press the PLAY/o button or the STOP/p button to select SET CLOCK, then press the F.FWD/B button.
3
If OFF appears to the right of AUTO CLOCK, press the F.FWD/B button to select ON. Then, press the MENU button. Or, if ON appears to the right of AUTO CLOCK, press the MENU button.
1 | MENU |
1
4
7
MUTE
VCR
STATUS/EXIT
2 3
5 6
8 9
0ALT.CH
TV CBL/DBS
CLEAR
4
CH.
VOL.
AUTO CLOCK
AUTO CLOCK USES PBS CHANNEL DATA
→SET PBS CH. AUTO SET PBS CH. MANUAL
SELECT op CHOOSE B
TO END PUSH EXIT
4
●If you want the VCR to locate a local PBS station from which to take the time, press the PLAY/o button or the STOP/p button to select SET PBS CH. AUTO. Then press the F.FWD/B button. When the current time appears on the screen, you’re finished. Press the STATUS/EXIT button.
Or, you may be prompted to turn off the VCR. Turn off the VCR power, and leave it off for several minutes. When the cur- rent time appears on the VCR display panel, the clock is set. You may turn on the VCR again.
●If you want to tell the VCR the PBS station from which to take the time, press the PLAY/o button or the STOP/p button to select SET PBS CH. MANUAL. Press the F.FWD/B button, then use the Number but- tons to enter the channel number of the desired PBS station. When the current time appears on the screen, you’re finished. Press the STATUS/EXIT button.
NOTE: CANNOT FIND PBS CLOCK DATA may flash on the screen. Press the PLAY/o button or the STOP/p button to choose SELECT NEW PBS CH., then press the F.FWD/B button. Use the Number buttons to enter the channel number of another PBS station.
Or, press the PLAY/o button or the STOP/p button to select SET PBS CH. AUTO. Press the F.FWD/B button. You will be prompted to turn off the VCR. Turn off the VCR power, and leave it off for several minutes. When the current time appears on the VCR display panel, the clock is set. You may turn on the VCR again.
| VCR PLUS+ |
|
VAR.SLOW | /ENTER | SLOW |
TRACKING | F.ADV | X2 PLAY |
QUICK TIME | INDEX REC END | SKIP |
| SEARCH |
|
Helpful Hints
•If you enter an incorrect PBS chan- nel number at step 4, press the CLEAR button, then enter the cor- rect channel number.
•If you have an antenna, you may select channels
•The clock cannot be set automati- cally if you don’t receive a channel that carries a time signal in your area. Set the clock manually.
•If there are only a few channels in your area that carry time signals, setting the clock automatically may take several minutes. If nothing happens even after you wait several minutes, set the clock manually.
•You cannot select AUTO CLOCK at step 3 during tape playback.
