Philips VRB412AT, VRB612AT owner manual Playing, VHS Quasi Play Back Sqpb

Read and follow the steps below to play a tape.

1

Turn on the TV and set it to channel 3 or 4, whichever channel the CH3/CH4 switch on the back of the VCR is set to.

Playing 29

1Turn on the TV.

2Insert a tape in the VCR.

2

Insert a tape in the VCR. The PWR., VCR, and Cassette-Inside lights will appear on the display panel. If the tape’s record tab has been removed, playback will start automatically.

3

If playback does not start automatically, press the VCR button, then press the PLAY/o button.

4

	POWER
	VCR
3	REW
5	1
	MENU
	4

7

ENTER

VCR/TV EJECT

TV CBL/DBS

PLAY

	F.FWD
STOP
STATUS/EXIT	CLEAR

2	3
5	6	CH
8	9
	ALT. CH
0		VOL

6

4

Press the STOP/p button to stop playback.

5

Press the REW(ind)/{ button to rewind the tape.

6

Press the EJECT button to remove the tape.

S-VHS Quasi Play Back (SQPB)

This unit has a SQPB function that allows you to view a tape recorded in S-VHS format. A tape recorded in S-VHS format will play the same as a tape recorded in normal format. This unit detects whether the tape is recorded in S-VHS format or in nor- mal format.

SPEED TIME SEARCH PAUSE/STILL

REC/OTR MEMORY SLOW MUTE

Helpful Hints

•If the tape you want to play is already in the VCR, make sure the VCR power is on and the VCR is in VCR position. (The VCR light will appear on the display panel. If it does not, press the VCR/TV button once.) Press the VCR button, then press the PLAY/o button.

•Other playback options and fea- tures are on pages 38-45.

•When you play a tape recorded in S-VHS format on this unit, you can not get the high resolution that would be available on an S-VHS VCR. Noise lines (black and white streaks) may appear on the picture.

•If REPEAT PLAY is set to ON, play- back will begin automatically, even when the record tab is intact.