Philips VRB664AT Multi-Channel Television Sound System, Understanding On-Screen Displays

Multi-Channel Television Sound System 55

Your VCR can play recordings broadcast in Hi-Fi (high fidelity) stereo, which produces a crisp, clear sound from two sources. Your VCR also can play tapes recorded in a second audio (usually, that means your program is recorded in a second language). Of course, your VCR will play tapes recorded in monaural (single-source) sound as well.

Your VCR also will record in Hi-Fi stereo or in second audio, so when you play back that tape on the VCR, it will be in stereo or second audio.

Read the directions on this page to familiarize yourself with your VCR’s stereo and second audio setups. Then follow the directions on page 56 to record in stereo or second audio and the directions on page 57 to play back tapes recorded in Hi-Fi stereo.

Understanding On-Screen Displays

When you receive a signal from a channel you’re watching, portions of the on-screen display shown below will appear when you press the STATUS/EXIT button on the remote control.

The indication 2ND AUD or TV STEREO that appears on this side of the status display tells you if your VCR is pro- grammed to receive a second audio or stereo broadcast (it cannot be programmed to receive both at the same time). Follow the steps on page 56 to program the VCR to receive a second audio or stereo broadcast.

STOP		12:00 AM
TV STEREO		CH 02
		STEREO
		2ND AUD
SLP	1:23:45	HIFI

The indication 2ND AUD or STEREO that appears on this side of the status display tells you if the program you’re watching is available in second audio or stereo. Even though a program is available in second audio or stereo, you still must program the VCR to receive or record the pro- gram. Follow the directions on page 56. This indication is not available during tape playback.

To record and play back programs broadcast in stereo, even if you have a Single-Speaker TV, just use one of the connections shown, then follow the steps on pages 56-57.

Stereo Amplifier	Single-	Stereo	Monitor
or Receiver	Speaker TV	Speaker TV	TV

R	L
	AUDIO		ANT
			IN
		L
	OUT	IN
		R
	VIDEO		OUT
	OUT	IN	CH3 CH4

For stereo sound, connect the audio cables to the AUDIO OUT Jacks on the VCR and to the AUDIO IN Jacks on the Stereo Amplifier or Receiver. Then, connect the video cable to the VIDEO OUT Jack of the VCR and to the VIDEO IN Jack of a moni- tor TV.

OR

OR, connect only the RF coaxial cable (supplied) to the VCR’s OUT Jack and to the TV’s ANTENNA IN Jack.