Manual Clock Setting, Instructions continue on | Philips VRB664AT

There are two ways to set the clock. With manual clock setting, you tell the VCR the current time. With automatic clock setting, the VCR gets the current time from your local PBS station. It keeps track of the time by constantly referring to the time broad- casted by your PBS station.

If you are using a Cable Box or Direct Broadcast System, you must set the clock manually.

Follow the instructions under either manual clock setting or auto- matic clock setting (page 17) to set the VCR’s clock. Before you begin, make sure:

●The VCR is hooked up and turned on, and channels are pro- grammed into the VCR’s memory (see pages six-12).

●The VCR is in VCR position. The VCR light will appear on the display panel. If it does not, press the VCR/TV button once.

Do each step within 60 seconds of the previous step.

Manual Clock Setting

1

Press the VCR button.

2

Press the MENU button.

SELECT op CHOOSE B

→PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK	OFF
AUTO DBS	OFF
RECORD LINK
TO END PUSH EXIT

Setting the Clock 15

			3-4
	POWER		EJECT
	VCR/TV		SPEED	MEMORY
	REC/OTR			PAUSE/STILL
			PLAY
	REW		F.FWD
2			STOP
2	MENU	STATUS/EXIT		CLEAR
	1	2	3
	4	5	6	CH.
	4	5	6
	7	8	9
1	MUTE	0	ALT.CH	VOL.
				VOL.
	VCR	TV	CBL/DBS
			VCR PLUS+
	VAR.SLOW		/ENTER	SLOW
	TRACKING		F.ADV	X2 PLAY
	SMART	TIME	INDEX REC END	SKIP
	PICTURE	TIME	INDEX REC END	SKIP

SEARCH

3

Press the PLAY/o button or the STOP/p button to select SET CLOCK, then press the F.FWD/B button.

SET CLOCK	[ON]
→AUTO CLOCK	[ON]
SET MANUAL CLOCK	[ON]
DAYLIGHT SVG TIME	[ON]
SET TIME ZONE
(AUTO)

TO CONTINUE PUSH MENU

SELECT op CHOOSE B

TO END PUSH EXIT

4

Press the PLAY/o button or the STOP/p button to select SET MANUAL CLOCK, then press the F.FWD/B button.

TIME – – : – –

DATE – – / – – / – –

TO END PUSH EXIT

Instructions continue on page 16.

Helpful Hints

•To display the time on the TV screen, press the STATUS/EXIT but- ton. Details are on page 26.

•Power failures that last for more than one minute can cause you to lose your clock setting if you set the clock manually. If this happens, reset the clock.

Image 15

Philips VRB664AT Manual Clock Setting, Do each step within 60 seconds of the previous step, Instructions continue on

Contents

VRB664AT For Customer Use Dear Philips product owner Features IntroductionDeclaration of Conformity Table of Contents Removing the Plastic Cover from the Front Panel Putting Batteries in the Remote ControlUsing the Remote Control VCR maintenance Disconnect the antenna or cable from your TV Hookups Without a Cable Box/Direct Broadcast System Plug in the TV and the VCR Hookups Without a Cable Box/Direct Broadcast System cont’d Hookups With a Cable Box/Direct Broadcast System ConnectionsRecording/Viewing Any Channel Recording One Channel/Watching Another Hookups With a Cable Box/Direct Broadcast System cont’d Hookups With a Stereo TV Press the Menu button. The display shown below will appear Turning on Your VCR Press the VCR button Press the Menu button Automatic Channel Setup Adding/Deleting Channels Automatic Channel Setup cont’d Press the STATUS/EXIT button once or twice to exit Reviewing Memorized Channels Manual Clock Setting Do each step within 60 seconds of the previous stepInstructions continue on Enter a 0 before a single-digit number Setting the Clock cont’d Press the VCR button, then press the Menu button Automatic Clock Setting Time Zone Daylight-Savings Time Language Selection Setting the Remote to Operate a TV Cable BOX Codes Remote Control Buttons Remote Control Buttons cont’d Number Buttons REWind/ ButtonRECord/OTR Button Menu Button If you select Status ON, then select Counter only OFF On-Screen Status DisplaysStatus Display example only If you select Status ON, then select Counter only on VCR Display Panel Front Panel Rear Panel VHS Quasi Play Back Sqpb Playing Turn on the TV and set it to channel 3 or 4, whichever chan Recording OTR CH12 One-Touch Recording Recording One Channel/Watching Another Daily Timer Recording Timer Recording cont’d Timer Recording cont’d Press the STATUS/EXIT button. Program WAS COMTape Speeds Checking or Cancelling Timer Recordings Channels Setting Up the VCR Plus+ Programming System Setting Up the VCR Plus+ Programming System cont’d Timer Recording with the VCR Plus+ Programming System See page 58 for more hints Set the clock. Details are on pages Auto DBS RecordLink RF coaxial cable Rerecording Tape Duplication Repeat Play Press the PLAY/o button or the STOP/p button to selectPress the F.FWD/B button so that on appears beside Automatic Operation Features Playing a Tape at Double Speed Special Effects PlaybackForward and Reverse Searching SP/LP/SLP Super High Speed Searching LP/SLP Viewing a Still Picture Viewing a Slow Motion PictureDuring tape playback, press the PAUSE/STILL button. a Child Lock When Child Lock is activated Smart Picture Press the VCR button Press the Time Search button Time Search Press the VCR button Press the Index Search button Example Skip Search Record End Search Real-Time Counter Memory Blue Background Understanding On-Screen Displays Multi-Channel Television Sound System Multi-Channel Television Sound System cont’d Please see additional notes on Hi-Fi Stereo Sound System Helpful Hints Helpful Hints cont’d Cable Box/DBS Output Channel 03 or Glossary Specifications Video Cassette Recorder or Player Limited Warranty Payment, if applicable Limited Warranty cont’dTo obtain a replacement product from Philips Payment Amount Automatic IndexPage Page Page Supplied Accessories