•Ensure that the turbo mode of your wireless router is switched off, if your router has this function.
The wireless firmware update failed, what do I do?
1
2
3 On the PC, launch the WADM on the PC to update the firmware.
I have problems installing WADM or launching WADM after installation, what do I do?
•Ensure that the operating system of the PC meets the requirements.
•Ensure that the PC is
Some files on the USB device are not displayed, what do I do?
•Check if the number of folders exceeds 99 or the number of titles exceeds 999.
•Only completely recorded MP3/WMA files can be found and played. Check if the file has been recorded completely.
•
played.
The remote control does not function properly, what do I do?
•Reduce the distance between the remote control and the WAC7500.
•Insert the batteries with correct polarity (+/- as indicated inside the battery compartment).
•Replace the batteries.
•Point the remote control directly at the infrared sensor.
The screen of the WAC7500 is stuck in a menu or shows no response for a long period of time
•Press 
.
•If the problem persists, restart the power (disconnect and reconnect the power
plug) to reset the WAC7500.
‘No Disc’ / ‘Cannot read CD’ is displayed, what do I do?
•Insert a suitable disc.
35EN
•Check if the disc is inserted with the graphics side (label) facing up.
•Wait for the condensation moisture on the lens to clear.
•Replace or clean the disc.
•Use a finalized
wac7500_um_01eng.indd 35 |
| |
|
|
|
