Express Installation
Option 1:
Direct connection
Choose this option if you want to connect Music Center to a Standalone PC without LAN/Wireless Network
1 In Software Installation page, click to select
Music Center connect to Standalone PC, no LAN/Wireless Network
2 When prompted by the installation wizard, ensure the supplied Ethernet cable (straight cable) is connected to Center’s ETHERNET port
3 Follow the screen instructions to finish the PC connection.
➜The screen shows: “The connection to your Music Center has been established”
4 Click Next to start DMM installation.
➜The icon 
appears on your computer desktop after DMM installation is finished.
Tips:
–If your PC is also connected to Internet via XDSL modem, use a wired router or wireless access point and follow the installation steps of Option 2 and Option 3. Otherwise, manually change your PC’s IP from its orginal one to IP address: 192.168.107. 20, Subnet mask: 255.255.255.0 or vice versa.
To configure your IP, go to Start menu - Settings - Control Panel - Network Connections
–Properties. Scroll to Internet Protocol (TCP/IP) .
Express Installation
Option 2:
Wireless connection
Choose this option if you want to con- nect Music Center to a wireless. Router/ wireless Access Point or an existing wireless network
1 Check the wireless router/access point is working properly. Write down its SSID and also the WEP or WPA key if it is enabled in the router/access point
2 In Software Installation page, click to select
Music Center connect to Wireless Network
3 When prompted by the installation wizard, ensure the supplied Ethernet cable (straight cable) is con- nected to Center’s ETHERNET port
4 When the screen on the right appears,
a. Input the SSID you wrote down in the above step 1
b.In WLAN mode, click Infrastructure mode
c.Input the WEP or WPA key you wrote down in the above step 1
5 Follow the screen instructions to finish the PC con- nection.
➜The screen shows: “The WiFi settings of Music Center have been changed. ...... ”
Tips:
–It is recommended that WEP key encryption be used for better network performance and security.
–In Infrastructure mode, Channel is assigned automatically by the router/access point.
