Express Installation
6 To apply new settings on WACS700, you need to let both Center and Station enter Installation
Mode.
On Center:
a. Select HD. b. Press MENU
c. Use the navigation controls 3 or 4 and 2 to
enter Station Mgnt menu
d. In Station Mgnt menu, use the navigation controls 3 or 4 and 2 to select Add New
Station
e. Press STOPÇ to exit Installation Mode
when Center has found all the stations
On Station:
a. Select AUX. b. Press MENU.
c. Use the navigation controls 3 or 4 and 2 to
select Installation Mode
7 Click Next to start DMM installation.
➜The icon 
appears on your computer desktop after DMM installation is finished.
8 Disconnect the supplied Ethernet cable from your PC and Center., and then, connect your PC to the wireless router/access point.
Option 3:
Wired connection
Choose this option if you want to connect Music Center to an exist- ing wired network with wired router
1 Check the wired router is working properly and enable its DHCP.
2 In Software Installation page, click to select
Music Center connect to Wired Network
Express Installation
3 When prompted by the installation wizard, ensure the supplied Ethernet cable (straight cable) is con- nected to Center’s ETHERNET port.
4 When the screen on the right appears, select “Obtain an IP address automatically” .
5 Follow the screen instructions to finish the PC connection.
➜The screen shows: “......The connection to your Music Center has been established......”
6 To apply new settings, you need to power off WAC700 Center, and then power it on again.
7 Click Next to start DMM installation.
➜The icon 
appears on your computer desktop after DMM installation is finished.
8 Disconnect the supplied Ethernet cable from your PC and Center., and then, connect your PC and Center to the wired router.
Notes:
–If you are Windows 98 SE/ME user, you will be prompted to restart your computer before starting DMM installation.
–If you are Windows 2000 user, check Service Pack 2 is installed.
–Select PC’s network adapter that connects Center via the supplied Ethernet cable, if you have installed more than one network adapter on your PC
–In Option 3:Wired connection, avoid assigning the
IP address manually as: IP address: 169.254.xxx. yyy; Subnet mask: 255.255.0.0. Such an IP address will cause conflict with the WiFi network of WACS700 Center and Station, resulting in Center’s disabled Ethernet port.To restore the disabled Ethernet port, restore your WAC700 Center to its factory settings (see Chapter Reset in the User Manual)
