Preparation
Using the remote control | Using the navigation controls |
English
IMPORTANT!
– Remove the protective plastic tab before using the Station’s remote control.
–Always point the remote control directly towards IR area .
To replace the battery
1Press and hold 1 as indicated
2Simultaneously, pull the battery tray at 4
3Remove the old battery and put a new CR2025 battery in place
4Put back the battery tray
When selecting options on the set’s screen, you often need to use the navigation controls 1 / 2
/3 / 4.
1Press 3 / 4 to highlight an option
2 Enter its submenu by pressing 2
3Press 1 to return to the previous option list screen
4 Press OK or 2 to confirm
| 2 |
1 |
|
➠ | |
| 3 |
| C |
| R20 |
| 2 |
L | 5 |
I |
|
T |
|
HIUM |
|
CAUTION!
–Remove the battery if it is exhausted or will not be used for a long time.
–Batteries contain chemical substances, so they should be disposed of properly.
15
