HD | UPnP |
English
On WAC5 Center is located a 80GB hard disk, where music is centrally stored. Via
For the details on how to use WAS5 Station together with Wireless Music Center, see the user manual for WACS5.
UPnP
After connecting your WAS5 to an existing network, you can set up a UPnP* server in the network. Play from your WAS5 stations the music collection either on the Center or on the UPnP server.
*Univeral Plug and Play (UPnPTM) builds on standard networking technologies and provides standardized protocols for a wide variety of home and small business devices. It allows easy interoperability of all the devices supporting the the networking technologies.
Requirements for the UPnP server:
●The UPnP device has been connected to the same network as WAS5.
●UPnP server software is installed (e.g. Philips Media Manager, Musicmatch® ) and the UPnP server function is enabled.
– With Philips Media Manager, the UPnP server function is enabled by default.
To connect a UPnP server
If the WAS5 Station is now connected to Center,
1Check the Center is switched on or to standby
mode
2Check your
– Switch off your firewall
3Switch on the Station
4To select Select Server on Station
a.On the remote control, press MENU
b.Use the navigation controls 3 or 4 and 2 to
select
➜The Station ‘s display shows the list of servers connected
➜Server not found appears if there is no UPnP server in the network
5Use the navigation controls 3 or 4 and 2 to select your desired server
➜The Station ‘s display shows PC’s music as it does on PC
If the WAS5 Station has ever been connected to Center, but is now disconnected from Center
1Connect WAS5 to the power supply
➜ Display shows:“Connecting to Center...”
18