Check the battery level, Check the signal Strength | Philips XL390

Check the battery level

The battery icon displays the current battery level.

When the handset is off the base station/charger, the bars indicate the battery level (full, medium and low).

When the handset is on the base station/charger, the bars flash until charging is complete.

The empty battery icon flashes. The battery is low and needs recharging.

The handset turns off if the batteries are empty. If you are on the phone, you hear warning tones when the batteries are almost empty.The call gets disconnected after the warning.

What is standby mode?			English
Your phone is in standby mode when			English
it is idle.The standby screen displays
the handset name, handset number,
date and time.

Check the signal
strength

	The number of bars indicates
	The number of bars indicates
	the link status between the
	the link status between the
	handset and base station.The
	handset and base station.The
	more bars are shown, the better
	the connection is.

•Make sure the handset is linked to the base station before you make or receive calls and carry out the functions and features.

•If you hear warning tones when you are on the phone, the handset is almost out of battery or the handset is out of range. Charge the battery or move the handset closer to the base station.

EN 13

Image 15

Philips XL390, XL395 user manual Check the battery level, Check the signal Strength

Contents

Always there to help you Page Contents Network services Phone settingsAlarm clock Services Important safety Instructions Power requirementsTo avoid damage or malfunction Battery life may be shorter in low temperature conditions Quick start guide What is in the boxYour phone Congratulations on your purchase and welcome to Philips Press and hold to enter a pause Overview of the phone Or off Overview of the baseStation Above the key Find handsets It flashes when there is a new voice message Silent mode is activated ECO mode is activatedDisplay icons Telephone socket on the wall Get startedConnect the base station and charger Connect each end of the line cord to Install the handset Power socket on the wall10 EN Configure your phone country dependent Set the country/languageSet the date and time »»The handset starts charging Change the remote access PIN codeCharge the handset Select Menu Answ. Machine Check the signal Strength Check the battery level Quick call CallsMake a call Call through the direct key End a call Answer a call Make a second call Adjust the earpiece/ speaker volumeMute the microphone Turn the speaker on or off Make a conference call with external callers Switch between two calls Make a conference call Switch between callsMake a call to another handset Transfer a call During the conference call During an external call Enter text and numbers Switch between uppercase and lowercase Call from the phonebook PhonebookView the phonebook Search a record Add a record Edit a recordDelete a record Select Menu Phonebook Delete all, then press OK to confirm Delete all recordsDirect keys Set the direct keys Call log Call list typeSelect the call list type Delete a call record View the call recordsSave a call record to the phonebook Return a call Redial list Sound settings Set the date and time ECO modeName the handset Set the backlight of the LCD screen When the alarm rings Alarm clockSet the alarm Turn off the alarm Auto prefix ServicesAuto conference Network type Set auto prefix Dial modeSelect the recall Duration 32 EN Set the dial modeSelect Menu Services Register, then press OK to confirm Register the handsets Unregister the handsets Restore default settingsSelect Menu Services Unregistered, then press OK to confirm Select Menu Services Reset, then press OK to confirm Network services Call forwardCall return Hide your identity Call back service Through the base Confirm »»The setting is savedTurn the answering machine on or off Through the handset Announcements Record an announcementAnnouncement, then press OK to confirm 38 EN Listen to the announcement To start/Stop listening, press Incoming messages ICM 40 EN Set the ring delayDelete an incoming message Permanently deleted Remote access Activate/deactivate the remote accessChange the PIN code Enter # when you hear the announcement Enter your PIN code Access the answering machine remotely Display Technical data 44 EN Declaration of conformityCompliance with EMF Disposal of your old product and batteries Environmental information Questions Service is not activated. Check with your service provider Lativian/Bulgarian AppendixText and number input tables Key Upper case characters for English GAP Index PIN Phone Overview Set up Phone settings Phonebook 21, 25 0168