Questions | Philips XL395, XL390 specs

17Frequently asked

questions

No signal bar is displayed on the screen.

•• The handset is out of range. Move it closer to the base station.

•• If the handset displays [Unregister], register your handset.

Tip

•• For further information, see chapter ‘Service’, section ‘Register the handsets’.

I have chosen a wrong language which I cannot read, what do I do?

1 Press to go back to the standby screen.

2 Press to access the main menu screen.

3 One of the following options will appear on the screen:

[Phone setup] > [Language]

[Réglages] > [Langue]

[Telefon-Setup] > [Sprache]

[Config. telef.] > [Lingua]

4 Select it to access the language options.

5 Select your own language.

If I fail to register the additional handsets to the base station, what do I do?

Your base memory is full. Unregister the unused handsets and try again. No dialing tone

•• Check your phone connections.

•• The handset is out of range. Move it closer to the base station.

No docking tone

•• The handset is not placed properly on the base station/charger.

•• The charging contacts are dirty. Disconnect the power supply

first and clean the contacts with a

damp cloth.

I cannot change the settings of my voice mail, what do I do?

The voice mail service is managed by your service provider but not the phone itself. Contact your service provider to change the settings.

The handset on the charger does not charge.

•• Make sure the batteries are inserted correctly.

•• Make sure the handset is placed

properly on the charger.The battery icon animates when charging.

•• Make sure the docking tone setting

is turned on.When the handset is placed correctly on the charger, you can hear a docking tone.

•• The charging contacts are dirty. Disconnect the power supply

first and clean the contacts with a

damp cloth.

•• Batteries are defective. Purchase new ones from your dealer.

46EN

Image 48

Philips XL395, XL390 user manual Questions

Contents

Always there to help you Page Contents Phone settings Alarm clockServices Network services Important safety Instructions Power requirementsTo avoid damage or malfunction Battery life may be shorter in low temperature conditions What is in the box Your phoneCongratulations on your purchase and welcome to Philips Quick start guide Overview of the phone Press and hold to enter a pause Overview of the base StationAbove the key Find handsets Or off It flashes when there is a new voice message Silent mode is activated ECO mode is activatedDisplay icons Get started Connect the base station and chargerConnect each end of the line cord to Telephone socket on the wall Install the handset Power socket on the wall10 EN Configure your phone country dependent Set the country/languageSet the date and time Change the remote access PIN code Charge the handsetSelect Menu Answ. Machine »»The handset starts charging Check the battery level Check the signal Strength Calls Make a callCall through the direct key Quick call Answer a call End a call Adjust the earpiece/ speaker volume Mute the microphoneTurn the speaker on or off Make a second call Switch between two calls Make a conference call with external callers Switch between calls Make a call to another handsetTransfer a call Make a conference call During an external call During the conference call Switch between uppercase and lowercase Enter text and numbers Phonebook View the phonebookSearch a record Call from the phonebook Add a record Edit a recordDelete a record Delete all records Direct keysSet the direct keys Select Menu Phonebook Delete all, then press OK to confirm Call log Call list typeSelect the call list type View the call records Save a call record to the phonebookReturn a call Delete a call record Redial list Sound settings ECO mode Name the handsetSet the backlight of the LCD screen Set the date and time Alarm clock Set the alarmTurn off the alarm When the alarm rings Services Auto conferenceNetwork type Auto prefix Dial mode Select the recallDuration Set auto prefix Set the dial mode Select Menu Services Register, then press OK to confirmRegister the handsets 32 EN Restore default settings Select Menu Services Unregistered, then press OK to confirmSelect Menu Services Reset, then press OK to confirm Unregister the handsets Network services Call forwardCall return Call back service Hide your identity Confirm »»The setting is saved Turn the answering machine on or offThrough the handset Through the base Announcements Record an announcementAnnouncement, then press OK to confirm Listen to the announcement 38 EN Incoming messages ICM To start/Stop listening, press Set the ring delay Delete an incoming messagePermanently deleted 40 EN Remote access Activate/deactivate the remote accessChange the PIN code Access the answering machine remotely Enter # when you hear the announcement Enter your PIN code Technical data Display Declaration of conformity Compliance with EMFDisposal of your old product and batteries 44 EN Environmental information Questions Service is not activated. Check with your service provider Appendix Text and number input tablesKey Upper case characters for Lativian/Bulgarian English Index GAP Phone Overview Set up Phone settings Phonebook 21, 25 PIN 0168