English

USING THE ALARM

Cancelling the alarm completely

To cancel the set alarm time before it goes off, or during the alarm call:

With the radio switched off, press ALARM 1-RADIO or ALARM 2-BUZZER once or more until the selected alarm indicator disappears from the display.

Repeat alarm

This repeats your alarm call at 9-minute intervals.

1.During the alarm call, press REPEAT ALARM/ BRIGHTNESS CONTROL.

Display shows or flashing during a repeat alarm.

2.Repeat if desired up to 6 times.

ABOUT SLEEP

This set has a built-in sleep timer which enables the set to be automatically switched off during radio playback after a set period of time. There are four sleep times before the set turns itself off: 60, 30, 15 minutes and off.

SETTING SLEEP

1.Press SLEEP/ RADIO ON to switch on the radio.

2.Within 1 second, press SLEEP/ RADIO ON again once or

more until the display shows and SL:60.

SLEEP

While in the SLEEP display, press SLEEP/ RADIO ON once or more to select your sleep time.

Display shows in sequence: and the sleep

period time options: SL:60, SL:30, SL:15 and OFF.

The sleep time and radio frequency appear briefly before showing standby clock time with the indicator, if SLEEP is activated.

3.To cancel sleep, press either:

ALARM RESET/ RADIO OFF

REPEAT ALARM/ BRIGHTNESS CONTROL

SLEEP/ RADIO ON once or more until disappears from the display.

MAINTENANCE

If you do not intend to use the set for a long time, withdraw the power plug from the wall outlet.

Do not expose the set to humidity, rain, sand or excessive heat caused by heating equipment or direct sunlight.

To clean the set, use a soft, slightly dampened chamois leather. Do not use any cleaning agents containing alcohol, ammonia, benzene or abrasives as these may harm the housing.

10

Page 10
Image 10
Philips XP AJ 3430 manual About Sleep, Setting Sleep, Maintenance