English

SETTING THE CLOCK

The time is displayed using the 12 hour clock with

PM indicator (PM off = AM).

1.Turn the SET control to TIME.

2.Press 7 repeatedly or hold down on the button to adjust the hours.

Release 7 when you reach the correct hour.

3.Press 8 repeatedly or hold down on the button to adjust the minutes.

Release 8 when you reach the correct minute setting.

4.Turn the SET control to CLOCK.

RADIO

1.Press SLEEP/ RADIO ON once to switch on the radio.

™Display shows the radio frequency of the last selected waveband briefly before returning to the clock time. Your preset station is also shown if you are listening to a preset.

2.Press BAND if you wish to change waveband.

3.Adjust the sound using VOLUME.

4.Press ALARM RESET/ RADIO OFF to switch off.

RADIO

TUNING TO RADIO STATIONSAutomatic tuning

•Press 7 or 8 one second or more to tune to your station.

™The radio automatically tunes to a station of sufficient reception.

Manual tuning

•Press 7 or 8 briefly and repeatedly until you reach the desired frequency.

To improve reception:

FM: Adjust the position of the power cord (built-in antenna) for optimum reception.

AM: Uses a built-in antenna inside the set. Direct the antenna by adjusting the position of your set.

STORING AND USING PRESET STATIONS

You can store up to a total of 10 radio stations in the memory, 5 on each waveband.

1.Tune to your desired station (see TUNING TO RADIO STATIONS).

2.To store a preset, hold down briefly on a PRESET button 1-5 until you hear a double beep.

™ Display shows the preset number of your station.

3.Repeat steps 1 and 2 to store your other stations.

•You can overwrite a preset station by storing another frequency in its place.

4.Press a PRESET button 1-5 to listen to a preset station.

8