Damper Hold, User Memory / Factory Reset | Kawai CE200 manual

Function Buttons

16. DAMPER HOLD

This determines if the sound such as organ or strings should be held (on) or gradually decayed (off) when the damper pedal is depressed.

Press the BEAT button while holding down the TOUCH and the

TRANSPOSE buttons.

The display alternatively shows “dMP” (= Damper) and on/off status. The default is off.

Use the VALUE buttons to toggle on and off.

17. USER MEMORY / FACTORY RESET

USER MEMORY

This function allows the CE200 piano to save the user-definable settings when the power is turned off. Once written to the memory, the saved settings will be recalled every time you turn the power on.

The following settings can be saved.

:Sound type

:Effects/Reverb/Voicing setting

:Menu function settings

:Transpose

:Tempo, beat, and sound volume of the metronome

Press the PLAY/STOP button while holding down the TOUCH and the TRANSPOSE buttons.

The display alternatively shows “MEM” and “uSr”.

Press the REC button to execute the save operation.

The save operation is completed when the display shows "Wrt."

When you are finished, press any one of the SOUND SELECT buttons to exit the menu.

FACTORY RESET

This function will appear only when the user memory function has been used. This function resets the CE200 piano to the factory settings. All parameters you saved in “User Memory” will be reset to the factory preset values.

40	KAWAI DIGITAL PIANO CE200

Image 40

Kawai CE200 manual Damper Hold, User Memory / Factory Reset, Following settings can be saved

Contents

CE200 Page Important Safety Instructions Indicates a potential hazard that could result in injury Instruction for AC power cord U.K Declaration of Conformity Thank YOU for Purchasing a Kawai Digital Piano Read ME FirstParts Provided Side Panel a Pcs Back Board B Pedal Board C Bottom View Pedal Unit Fasten the main unit and the stand with four screws D Attaching the Headphone Hook Piano Music Jacks Supplying AC Power Assembling the Stand Turning on the power Adjust the volume levelPlaying the Piano Pedals Playing with More Sounds Selecting Another Preset SoundPress the Sound Select button under the name About Polyphony Value Buttons Entering Four Hands Mode Four Hands ModeSelecting Split Sounds Changing the Split Point Exiting Four Hands Mode Selecting Sounds in Four Hands ModeChanging Split Point Octave Shift for the Lower Section To ADD Reverb To ADD Other Effects Voicing NormalMellow Dynamic Starting the Metronome Changing the Time SignatureRhythm Metronome Metronome Adjusting the Metronome Volume Basics of the Recorder TWO-TRACK THREE-SONG RecorderRecorded Information Sound selection Pedal movements Recording Another Song Recording REC ButtonRecording Capacity Recorder and Metronome Press the PLAY/STOP button when you are finished recording Recording a Second Part Status of Song and Part Playing Back the Parts SeparatelyPlaying Back a Song PLAY/STOP Button Press the PLAY/STOP button again to stop play back Usingthe PLAY/STOP Buttonto Start Recording Erasing ALL the SongsErasing a Song Start flashing Piano Music Selecting the Touch Sensitivity Touch Button User Touch Transposing the Piano Transpose Button Tuning Multi Timbral ModeUser Memory / Factory Reset Brilliance Tuning BrillianceDamper Resonance Use the Value buttons to raise or lower the pitch Press the Piano button while holding down the Touch String ResonanceAbout String Resonance Brief Explanation of Temperaments TemperamentEqual Temperament Piano only Pythagorean Temperament Meantone TemperamentWerckmeister III Temperament Kirnberger III Temperament Equal Temperament Flat KEY Signature of Temperament Lower Octave Shift Midi Channel Sending Program Change NumbersLocal Control ON/OFF Use the Value buttons to change the channel number MULTI-TIMBRAL Mode ON/OFF Transmit Program Change ON/OFFMulti-Timbral On On1 and On2 Multi-Timbral Off Channel Mute Lower Pedal ON/OFFThen use the Value buttons to turn them on and off Can not be selected Layer Dynamics Layer Octave ShiftLayer Octave Shift can be set between -2 to User Memory / Factory Reset Following settings can be savedFactory Reset Damper Hold Function Buttons What is MIDI? Understanding MidiMidi Jacks Midi Channel Bass Using the CE200 Piano AS Controller Midi ConnectionChanging Transmitting Channel Electric Piano button while holding down the Touch Now You’re ready to play Audio ConnectionProgram Change Local Control Buttons Using the CE200 Piano AS a MULTI-TIMBRAL Sound Module MULTI-TIMBRAL Mode Using Midi Windows XP / Me users About a USB DriverWindows 2000 / 98SE users Macintosh OS X users Users of Macintosh OS9 or earlier Line OUT Jacks Bottom View Jacks Program Change Number Mapping Rhythm Style List Piano Music List Front Panel Sound Demo Song List Specifications Midi Exclusive Data Format Midi Implementation Chart Kawai Digital Piano Model CE200 Eng