Status of Song and Part | Kawai CE200 manual

When you are finished recording, press the PLAY/STOP button again.

STATUS OF SONG AND PART

You have probably noticed that some of the LED indicators are flashing, some are turned on, and some are turned off. The LED indicates the status of recording and play back as shown below.

The LED that is on indicates that the song or part has already been recorded.

The flashing LED indicates that the song or part is selected to record or play back.

The LED that is off indicates that the song or part is empty.

If you have recorded more than one song, you can check the song status, by pressing the REC or PLAY/STOP button.

3.2PLAYING BACK A SONG (PLAY/STOP BUTTON)

The PLAY/STOP button is used to select a song and part to play, and to start and stop play back of the recorded songs.

Press the PLAY/STOP button and the recorded song will start playing.

Press the PLAY/STOP button again to stop play back.

If you would like to listen to a different song, select your desired song number using the SOUND SELECT buttons while holding down the PLAY/STOP button and then release the buttons to start play back. The LED indicator for the selected song will flash when holding

down the PLAY/STOP button.

PLAYING BACK THE PARTS SEPARATELY

When you select a song recorded with two parts, you can play back the parts separately.

Hold down the PLAY/STOP button and look at the Part buttons.

The LED indicators for both parts will be on, indicating that you have successfully recorded two tracks. Release the PLAY/STOP button to

listen to what you have recorded. You should hear both parts.

Recorder

RECORDER

25

Image 25

Kawai CE200 manual Status of Song and Part, Playing Back the Parts Separately, Playing Back a Song PLAY/STOP Button

Contents

CE200 Page Important Safety Instructions Indicates a potential hazard that could result in injury Instruction for AC power cord U.K Declaration of Conformity Read ME First Thank YOU for Purchasing a Kawai Digital PianoParts Provided Side Panel a Pcs Back Board B Pedal Board C Fasten the main unit and the stand with four screws D Bottom View Pedal Unit Attaching the Headphone Hook Piano Music Jacks Assembling the Stand Supplying AC Power Adjust the volume level Turning on the powerPlaying the Piano Pedals Playing with More Sounds Selecting Another Preset SoundPress the Sound Select button under the name Value Buttons About Polyphony Four Hands Mode Entering Four Hands ModeSelecting Split Sounds Changing the Split Point Selecting Sounds in Four Hands Mode Exiting Four Hands ModeChanging Split Point Octave Shift for the Lower Section To ADD Other Effects To ADD Reverb Normal VoicingMellow Dynamic Changing the Time Signature Starting the MetronomeRhythm Metronome Metronome Adjusting the Metronome Volume TWO-TRACK THREE-SONG Recorder Basics of the RecorderRecorded Information Sound selection Pedal movements Recording REC Button Recording Another SongRecording Capacity Recorder and Metronome Recording a Second Part Press the PLAY/STOP button when you are finished recording Playing Back the Parts Separately Status of Song and PartPlaying Back a Song PLAY/STOP Button Press the PLAY/STOP button again to stop play back Erasing ALL the Songs Usingthe PLAY/STOP Buttonto Start RecordingErasing a Song Start flashing Piano Music Selecting the Touch Sensitivity Touch Button Transposing the Piano Transpose Button User Touch Multi Timbral Mode TuningUser Memory / Factory Reset Brilliance Brilliance TuningDamper Resonance Use the Value buttons to raise or lower the pitch Press the Piano button while holding down the Touch String ResonanceAbout String Resonance Brief Explanation of Temperaments TemperamentEqual Temperament Piano only Meantone Temperament Pythagorean TemperamentWerckmeister III Temperament Kirnberger III Temperament Equal Temperament Flat Lower Octave Shift KEY Signature of Temperament Sending Program Change Numbers Midi ChannelLocal Control ON/OFF Use the Value buttons to change the channel number Transmit Program Change ON/OFF MULTI-TIMBRAL Mode ON/OFFMulti-Timbral On On1 and On2 Multi-Timbral Off Lower Pedal ON/OFF Channel MuteThen use the Value buttons to turn them on and off Can not be selected Layer Dynamics Layer Octave ShiftLayer Octave Shift can be set between -2 to Following settings can be saved User Memory / Factory ResetFactory Reset Damper Hold Function Buttons Understanding Midi What is MIDI?Midi Jacks Midi Channel Bass Midi Connection Using the CE200 Piano AS ControllerChanging Transmitting Channel Electric Piano button while holding down the Touch Now You’re ready to play Audio ConnectionProgram Change Buttons Local Control Using the CE200 Piano AS a MULTI-TIMBRAL Sound Module MULTI-TIMBRAL Mode Using Midi Windows XP / Me users About a USB DriverWindows 2000 / 98SE users Users of Macintosh OS9 or earlier Macintosh OS X users Bottom View Line OUT Jacks Jacks Rhythm Style List Program Change Number Mapping Piano Music List Sound Demo Song List Front Panel Specifications Midi Exclusive Data Format Kawai Digital Piano Model CE200 Midi Implementation Chart Eng