CAUTION:

Be sure to secure the main unit to the stand with the screws. If you fail to do so, the unit could fall from the stand causing damage or personal injury.

10. Insert the pedal connection cord that comes from Pedal Board into the main unit’s pedal jack and fix with the clamp of the Side Panel.

11.Turn the adjuster (installed on the bottom of the Pedal Unit)

down until it makes firm contact with the floor. If the floor is carpeted, place a spiked furniture cup under the adjuster so that it makes firm contact with the carpet backing. Press any pedal with your foot. If the pedal rail flexes, lower the adjuster until flexing is minimized.

CAUTION:

Before moving your piano, turn the adjuster up so that it clears the floor.

ATTACHING THE HEADPHONE HOOK

1. Attach the Headphone Hook with two screws (ø4 x 14) to the holes next to the headphone jacks.

Headphone Jacks

Headphone Hook

Screws

ø4 x 14

INTRODUCTION

9

Page 9
Image 9
Kawai CE200 manual Attaching the Headphone Hook