Usingthe PLAY/STOP Buttonto Start Recording | Kawai CE200 instruction

Recorder

To play back an individual part, use the Part buttons while holding down the PLAY/STOP button to turn on/off each part. If the LED

indicator is on, that part will play. If the LED indicator is off, that part will not play.

USINGTHE PLAY/STOP BUTTONTO START RECORDING

The PLAY/STOP button can also be used to start recording. In this way, you can insert a blank bar at the beginning of the song.

Press the REC button to enable the piano to record first, then

press the PLAY/STOP button. On pressing the PLAY/STOP button, the CE200 piano starts recording regardless of whether you press a key or not.

3.3ERASING A SONG

This function allows you to erase any song you do not want to listen to.

To erase a specific song and part, first hold down both the REC and PLAY/STOP buttons. The LED indicators will display which songs have been recorded.

Select the desired song to erase by pressing the appropriate SOUND SELECT button while continuing to hold down both the REC and the PLAY/STOP buttons. The LED indicator of the selected song will

start flashing.

Press the Part button you want to erase and turn the LED indicator off. The part will be erased. When both parts for a song are erased, the

song becomes empty.

ERASING ALL THE SONGS

To erase all the songs at once, first turn off the power and then turn it on again while holding down both the REC and PLAY/STOP buttons.

26	KAWAI DIGITAL PIANO CE200

Image 26

Kawai CE200 manual Usingthe PLAY/STOP Buttonto Start Recording, Erasing ALL the Songs, Erasing a Song, Start flashing

Contents

CE200 Page Important Safety Instructions Indicates a potential hazard that could result in injury Instruction for AC power cord U.K Declaration of Conformity Parts Provided Thank YOU for Purchasing a Kawai Digital PianoRead ME First Side Panel a Pcs Back Board B Pedal Board C Bottom View Pedal Unit Fasten the main unit and the stand with four screws D Attaching the Headphone Hook Piano Music Jacks Supplying AC Power Assembling the Stand Playing the Piano Turning on the powerAdjust the volume level Pedals Press the Sound Select button under the name Selecting Another Preset SoundPlaying with More Sounds About Polyphony Value Buttons Selecting Split Sounds Entering Four Hands ModeFour Hands Mode Changing the Split Point Changing Split Point Exiting Four Hands ModeSelecting Sounds in Four Hands Mode Octave Shift for the Lower Section To ADD Reverb To ADD Other Effects Mellow VoicingNormal Dynamic Rhythm Metronome Starting the MetronomeChanging the Time Signature Metronome Adjusting the Metronome Volume Recorded Information Basics of the RecorderTWO-TRACK THREE-SONG Recorder Sound selection Pedal movements Recording Capacity Recording Another SongRecording REC Button Recorder and Metronome Press the PLAY/STOP button when you are finished recording Recording a Second Part Playing Back a Song PLAY/STOP Button Status of Song and PartPlaying Back the Parts Separately Press the PLAY/STOP button again to stop play back Erasing a Song Usingthe PLAY/STOP Buttonto Start RecordingErasing ALL the Songs Start flashing Piano Music Selecting the Touch Sensitivity Touch Button User Touch Transposing the Piano Transpose Button User Memory / Factory Reset TuningMulti Timbral Mode Brilliance Damper Resonance TuningBrilliance Use the Value buttons to raise or lower the pitch About String Resonance String ResonancePress the Piano button while holding down the Touch Equal Temperament Piano only TemperamentBrief Explanation of Temperaments Werckmeister III Temperament Kirnberger III Temperament Pythagorean TemperamentMeantone Temperament Equal Temperament Flat KEY Signature of Temperament Lower Octave Shift Local Control ON/OFF Midi ChannelSending Program Change Numbers Use the Value buttons to change the channel number Multi-Timbral On On1 and On2 MULTI-TIMBRAL Mode ON/OFFTransmit Program Change ON/OFF Multi-Timbral Off Then use the Value buttons to turn them on and off Channel MuteLower Pedal ON/OFF Can not be selected Layer Octave Shift can be set between -2 to Layer Octave ShiftLayer Dynamics Factory Reset User Memory / Factory ResetFollowing settings can be saved Damper Hold Function Buttons Midi Jacks What is MIDI?Understanding Midi Midi Channel Bass Changing Transmitting Channel Using the CE200 Piano AS ControllerMidi Connection Electric Piano button while holding down the Touch Program Change Audio ConnectionNow You’re ready to play Local Control Buttons Using the CE200 Piano AS a MULTI-TIMBRAL Sound Module MULTI-TIMBRAL Mode Using Midi Windows 2000 / 98SE users About a USB DriverWindows XP / Me users Macintosh OS X users Users of Macintosh OS9 or earlier Line OUT Jacks Bottom View Jacks Program Change Number Mapping Rhythm Style List Piano Music List Front Panel Sound Demo Song List Specifications Midi Exclusive Data Format Midi Implementation Chart Kawai Digital Piano Model CE200 Eng