ENGLISH 11

6Dry your face and thoroughly rinse the shaving unit with a sufficient amount of water after every shave. Make sure you rinse all foam

or shaving gel off the shaving unit (see also chapter 9).

USING THE BEARD STYLER (YS524,YS523,YS511 ONLY)

Only use this beard styler attachment to style facial hair. Do not use this attachment to style body hair or scalp hair.The different attachments of this appliance

are designed for specific types of hair and your facial

hair differs from body hair or scalp hair.

You cannot use the appliance while it is connected to the mains, as this may cause injury when you style in a wet environment.

Attaching the beard styler attachment

1Make sure the appliance is switched off.

2Pull the shaving attachment straight off the appliance.

Do not twist the shaving attachment while you pull it off the appliance.

3Insert the lug of the beard styler attachment into the slot in the top of the appliance (1).Then press it downwards (2) to attach it to the appliance.

Page 11
Image 11
Philips Y5524 manual Or shaving gel off the shaving unit see also chapter, Hair differs from body hair or scalp hair