SAFETY PRECAUTIONS

Despite the measures that have been taken to make electronic flash equipment safe, it must be recognized that high voltages and high temperatures do exist within the power supply / lighting unit. Certain precautions must be observed in handling the unit. Contact with internal high voltage may result in severe injury or death.

1.Before installing or removing the flashtube and modeling lamp, be sure this appliance is turned off, cooled and unplugged from AC power source.

2.Do not touch the glass tubes with bare hands, as normal body oils will shorten the bulb’s life. Always use a clean cloth or wear gloves to protect your hand from glass breakage and heat.

3.Do not defeat the purpose to the three-wire line cord by disconnecting the ground. Connect to properly functioning and grounded 3-pin receptacles only. If you are using an extension cord, be sure the cord has an equivalent or greater rating and has a ground.

4.Do not insert a screwdriver or other metal objects into the flashtube socket area or vents. Contact with high voltage may result.

5.Do not operate this appliance with a frayed or damaged line cord. When replacing or using the unit with an extension cable, be sure the cable has an equivalent or greater rating and is a properly connected 3-wire grounded cable.

6.Do not attempt to use this appliance if it has been dropped or damaged, until a qualified service person has serviced it.

7.Do not operate the unit with a damaged or broken flashtube or modeling lamp. Do not use flashtubes with broken, cracked or missing glass envelopes. To prevent damage or injury always use Photogenic specified replacements for the flashtubes and modeling lamps.

8.Perform no internal service work on this unit. Refer all such service to a qualified service person or return to the factory. This will provide you safety and continuation of your warranty.

9.Do not operate when water is present and from extreme temperature shifts. If the unit is stored in hot or below freezing temperatures, allow at least one hour at room temperatures before using.

PREPARATION AND BASICS

Unpacking and Setup:

Unpack all units carefully to remove all parts from the carton(s). Do not discard or destroy the packing material until the equipment has been inspected, assembled, and all parts accounted for.

After unpacking, all parts should be examined for any damage, which may have been caused by rough handling during shipment. If any damage is detected, contact the delivering carrier at once. Claim for damage should be made to the delivering carrier before destroying packing cartons.

To set up the unit, first mount and secure it on a suitable stand. The PowerLight stand adapter allows the unit to be mounted on a stand with a 3/8” to 5/8” post. Be sure to use a stand that is stable and will not tip easily.

Page 2 Page 4
Page 3
Image 3
Photogenic Professional Lighting PLR1000DR, PLRX500DR, PLRX1000DR, PLR500DR manual Safety Precautions, Preparation and Basics
Page 2 Page 4

PLR1000DR, PLR500DR, PLRX500DR, PLRX1000DR specifications

Photogenic Professional Lighting has established itself as a leading innovator in the realm of photography and videography equipment. Among their range of products, the PLRX1000DR, PLRX500DR, PLR500DR, and PLR1000DR lights are notable for their advanced features and superior performance.

The PLRX1000DR is a high-powered lighting solution designed for professional photographers and videographers. With a maximum output of 1000 watts, this unit is perfect for large studio setups or outdoor shoots where powerful lighting is required. One of its standout features is the built-in digital display that offers precise control over power settings, allowing users to adjust the light intensity and manage the color temperature with ease. The PLRX1000DR also employs advanced thermal management technology, ensuring the unit remains cool during extended use, which enhances its durability.

Meanwhile, the PLRX500DR is a versatile option, delivering 500 watts of output. Ideal for smaller studio environments or portrait photography, the PLRX500DR includes an innovative wireless remote control system, providing photographers with the flexibility to adjust settings wirelessly. This feature not only saves time but also allows for creative adjustments on-the-fly, especially in dynamic shooting conditions.

The PLR500DR and PLR1000DR lights, with outputs of 500 watts and 1000 watts respectively, cater to photographers who seek a reliable and efficient lighting solution. Both models are equipped with a robust aluminum construction that ensures durability without compromising portability. They are designed with user-friendliness in mind, featuring simple operation buttons and intuitive interface displays.

Photogenic's proprietary softbox technology is employed across these models, allowing for soft, even lighting that minimizes harsh shadows—this is crucial for professional photography and videography. Moreover, they are compatible with various light modifiers, giving users the ability to customize their lighting to suit any shooting scenario.

In summary, the PLRX1000DR, PLRX500DR, PLR500DR, and PLR1000DR from Photogenic Professional Lighting represent cutting-edge technology with features designed for today's creative professionals. From powerful outputs and wireless controls to robust construction and soft lighting capabilities, these units are built to meet the demands of high-level photography and videography. Whether in the studio or on location, these lights are reliable partners in achieving stunning visual results.
Top Page Image Contents