Introduction 1
Copyright 2005-6 Pico Technology Limited. All rights reserved. PS2000044-1.1
1Introduction

1.1 Overview

The
PicoScope 2000 series
is a range of low-cost, high-performance PC Oscilloscopes,
fully
USB 2.0
capable and backwards compatible with USB 1.1. There is no need for an
additional power supply as power input is from the USB port, so these oscilloscopes are
highly portable.
With the
PicoScope software
, you can use PicoScope 2000 series oscilloscopes as PC
Oscilloscopes and spectrum analysers; with the
PicoLog software
, you can use them as
data loggers.
A PicoScope 2000 PC Oscilloscope is supplied with the following items:
USB cable, for use with both types of USB port
Software CD
Quick start guide
Please read the important information in this introductory section and then proceed to the
Installation instructions
.

1.2 Safety symbols

Symbol 1: Warning Triangle

This symbol indicates that a safety hazard exists on the indicated connections if
correct precautions are not taken. Ensure that you read all safety documentation
associated with the product before using it.

Symbol 2: Equipotential

This symbol indicates that the outer shells of the indicated BNC connectors are all at
the same potential (shorted together). You must therefore take necessary precautions
to avoid applying a potential across the return connections of the indicated BNC
terminals, as this may result in a large current flow causing damage to the product
and/or connected equipment.