Pico Macom FM Stereo Audio Modulator Operation and Controls, Pcfm, Front Panel Control

PCFM Manual.qxd 7/10/03 1:14 PM Page 6

Operation and Controls

PCFM

1 2 3 4 5 6 7

PCFM Agile FM Stereo Audio Modulator

POWER

AUDIO MODULATION R.F OUT TEST POINT

FREQ.

MONO STEREO

-20 DB

Front Panel Control

1.Power Indicator:

The LED indicates unit is operating.

2.Station Display:

Seven-segment display indicates FM frequency.

3. Freq. Select Controls:

Push these buttons to change channel to higher or lower frequency.

4.Mono/Stereo:

Slide switch selects mono or stereo modes.

5.Audio Modulation:

The audio modulation level (loudness) is set with this control.

6.RF Output:

The RF level is set with this control.

7.Test Point:

The -20 dB RF output test point is used to set the RF output level and monitor station performance.

1 2 3 4

	AUDIO IN	120VAC
RF OUT	R	60Hz 10W
		L
		600W MAX

Back Panel Control

1.RF Out:

Connect this port to the distribution system.

2.Audio In:

Connect a 1 V p-p (2 V p-p max.) mono or stereo signal source from a satellite receiver or VCR.

4.Convenience Outlet:

Allows looping of power between units.

5.Power Cord:

The three-prong type power plug connects to a 120 VAC, 60 Hz electrical outlet.

6 Ph: 800-421-6511 www.picomacom.com

Rev. 07/03