Pico Macom MPC-12R manual Power Supply Connectors, Chassis, Ordering Information

MPC12R.qxd 7/7/06 10:46 AM Page 5

Specifications

MPC-12R

Universal Chassis and Hot-Swappable Redundant Power Supply

® ®

MPC-HSSMPC-HSS

Front View

MPC-BP		Rear View
Cover
Plate
	Power Supply		Connectors

	Input Voltage Range:		90 to 264 VAC
	Frequency Range:		47 to 63 Hz
	Output Specifications:	V1:	5 VDC/4 A
		V2:	12 VDC/3.5 A
	Efficiency:	V3:	30 VDC/.27 A
			>75% typical
	Operating Frequency:		100 kHz
	Input Inrush Current:		<30 A @ 115 VAC @ 25° C
	Line Protection:		PCB AC line fuse
	DC Output Ripple:		Within 1% (Vpp) at maximum
			load @ 25° C @ PS output
	Line/Load Regulation:		terminal
			±1%
	Minimum Load:		10% of full rated load
	Operating Temperature Range: 0° to 60° C
	Storage Temperature Range:		-40° to 85° C
	Overcurrent Protection:		No damage to outputs when
			shorted to ground
Chassis
	Dimensions:		19˝(L) x 71/2˝(D) x 31/2˝(H)
	Weight:		7.8 lbs.

Input (on back plane):	IEC 320 inlet connector
Output (on back plane/
each connector):	12 Pin: Pins 1,5,9 - 5 VDC
	Pins 2,6,10 - 12 VDC
	Pins 3,7,11 - Ground
	Pins 4,8,12 - 30 VDC
	4 Pin: Pins 1 - 5 VDC
	Pins 2	- 12 VDC
	Pins 3	- Ground
	Pins 4	- 30 VDC

Ordering Information

MPC-12R12-Mini-Mod Chassis and Redundant Power

Supply System Chassis Equipped with

2-Hot-Swap Modules, Backplane-Bracket,

and Wire Harness

MPC-HSRRedundant Power Supply Upgrade Kit for MPC12 System Consists of 2-Hot-Swap Modules, Backplane-Bracket, and Wire Harness

MPC-HSSReplacement Single Power Supply Module

MPC-12CUniversal Chassis (chassis only)

MPC-BPBlank Cover Plate

Ph:800-421-6511 www.picomacom.com 5

Rev. 07/06