8
This connection conguration for 5.1 surround applications uses an AV receiver with a separate subwoofer output. Since the AV
receiver handles the bass management in this conguration, the settings for each loudspeaker can be adjusted individually via the
menu. Note that in this case, the LOW PASS setting of the P SUB 4 has no effect (see page 13). Refer to the user manual of your AV
receiver for information on the individual setup controls.
PIEGA P SUB 4
Conguration example for surround mode

Dolby Digital System - Surround System with AV Receiver

Connecting the System
Connection:
>Connect the P SUB 4 cable to the terminal
marked SUBWOOFER (or similar) on the AV receiver
>Connect the P SUB 4 cable to the terminal on the
subwoofer marked LFE/IN
>For this use a suitable connection cable with
cinch plugs (not supplied with the loudspeakers)
>Connect the front, rear and center loudspeakers using the
loudspeaker terminals provided on your AV receiver
>Setting tip: Turn the LOW PASS knob up full and the VOLUME
knob to just over half way
Benet:

The most frequently used and ideal

connection conguration for 5.1 surround mode

>The P SUB 4 can be tuned for optimum results...!

INPUT
OUTPUT
R L
LFE / IN
PHASE
LINE
Subwoofer
L
R
Front R Rear R Center Rear L Front L
Amplifier
Front
Speaker R
Front
Speaker L
Center
Speaker
Rear
Speaker R
Rear
Speaker L