The System Setup menu07
44
En
•
SB 2ND Z
– Select to use the (surround
back) B speaker terminals to listen to
stereo playback in another room (see
Second Zone speaker B setup
on page 62).
•
SB BIAMP
– Select this setting if you’re bi-
amping your front speakers (see
Bi-amping
your front speakers
on page 63).
3 When you’re finished, press
RETURN
.
You will return to the System Setup menu.
Manual MCACC speaker setup
You can use the settings in the Manual MCACC
setup menu to make detailed adjustments
when you’re more familiar with the system.
Before making these settings, you should have
already completed
Automatically setting up for
surround sound (MCACC)
on page 12.
You only need to make these settings once
(unless you change the placement of your
current speaker system or add new speakers).
Important
•For some of the settings below, you’ll have
to connect the setup microphone to the
front panel and place it about ear level at
your normal listening position. See
Automatically setting up for surround
sound (MCACC)
on page 12 if you’re
unsure how to do this. Also see
Other
problems when using the Auto MCACC
Setup
on page 14 for notes regarding high
background noise levels and other possible
interference.
• If you’re using a subwoofer, switch it on
and turn up the volume to the middle
position.
1Select ‘M MCACC’ from the System Setup
menu.
See
Making receiver settings from the System
Setup menu
above if you’re not already at this
menu.
2 Select the setting you want to adjust.
If you’re doing this for the first time, you might
want to make these settings in order.
•
CH LEVEL
– Make fine adjustments to the
overall balance of your speaker system (see
Fine Channel Level
below).
•
CH DISTN.
– Make precise delay settings
for your speaker system (see
Fine Channel
Distance
below).
The last five settings are specifically for
customizing the parameters explained in
Acoustic Calibration EQ
on page 46:
•
EQ A. SET
– Measure the acoustic
characteristics of your room and
automatically adjust the frequency balance
of your speaker system (see
Setting the
Acoustic Calibration EQ automatically
on
page 46).
•
EQ COPY
– Copy Acoustic Calibration EQ
settings for manual adjustment (see
Copying your Acoustic Calibration EQ
settings
on page 46).
•
C1 ADJ/C2 ADJ
– Make detailed manual
adjustments to your custom Acoustic
Calibration EQ settings (see
Setting the
Acoustic Calibration EQ manually
on
page 46).
•
EQ CHECK
– Check the
ALL CH
,
F. ALIGN
and custom settings (see
Checking your
Acoustic Calibration EQ settings
on
page 47).
Fine Channel Level
• Default setting:
0dB
(all channels)
You can achieve better surround sound by
properly adjusting the overall balance of your
speaker system. The following setting can help
you make detailed adjustments that you may
not achieve using the
Quick surround sound
setup
on page 12.
VSX_815-915.book.fm 44 ページ ２００４年１２月８日　水曜日　午後４時３分