Menu operations
Audio Adjustments | Display | Equalizer curve | |
Notes | Powerful | Powerful | |
! When selecting FM as the source, you cannot |
|
| |
Natural | Natural | ||
switch to Source Level Adjuster. | Vocal | Vocal | |
! When selecting Bluetooth telephone as the | |||
|
| ||
Custom1 | Custom 1 | ||
source, you can not use this function. | |||
|
| ||
| Custom2 | Custom 2 | |
|
|
| |
Using fader/balance adjustment | Flat | Flat | |
|
| ||
You can change the fader/balance setting to | Super Bass | Super bass | |
provide an ideal listening environment for all | ! The equalizer curves for Custom1 and | ||
of the occupied seats. | |||
Custom2 can be adjusted. | |||
| |||
1 Display the audio function menu. | ! You cannot select Custom1 and Custom2 | ||
Refer to Introduction of menu operations on | when using the | ||
! When Flat, no changes are made to the | |||
2 Touch Fader/Balance on the audio func- | sound. You can check the effects of the | ||
equalizer curves by switching alternatively | |||
tion menu. | between Flat and another equalizer curve. | ||
3 Touch a or b to adjust the front/rear | 1 Display the audio function menu. | ||
speaker balance. | Refer to Introduction of menu operations on | ||
Range: Front:15 to Rear:15 |
| ||
# Select F/R: 0 L/R: 0 when only using two | 2 Touch Graphic EQ on the audio function | ||
speakers. | |||
# The front/rear speaker balance cannot be ad- | menu. |
| |
justed when the rear output setting is | # You can select Graphic EQ when Auto EQ | ||
Subwoofer. Refer to Setting the rear output and | function is off. |
| |
3 Touch c or d to select the desired item. | |||
| |||
4 Touch c or d to adjust the left/right | |||
speaker balance. |
Range: Left:15 to Right:15
Adjusting the 8-band graphic equalizer
Section
14
operations Menu
Using the equalizer
You can adjust the equalization to match the car’s interior acoustic characteristics as de- sired.
Recalling equalizer curves
There are seven stored equalizer curves which you can easily recall at any time. Here is a list of the equalizer curves.
You can adjust the level of each band for the equalizer curves.
!A separate Custom1 curve can be created for each source. If you make adjustments when a curve other than Custom2 is se- lected, the equalizer curve settings will be stored in Custom1.
!A Custom2 curve that is common for all sources can be created. If you make adjust- ments when the Custom2 curve is se- lected, the Custom2 curve will be updated.
En 55