Menu operations

2 Touch DT.WARNING to turn the warn-

!

Ground – When the polarity of the con-

ing tone on.

 

nected lead is negative while the gear shift

# To turn the warning tone off, touch

 

is in REVERSE (R) position

DT.WARNING again.

!

Off – When a rear view camera is not con-

 

 

nected to this unit

Section

14

Menu

Setting the rear view camera (back up camera)

CAUTION

Pioneer recommends the use of a camera which outputs mirror-reversed images. Otherwise, the screen image will appear re-

Auto EQ (auto-equalizing)

The auto-equalizer automatically measures the car’s interior acoustic characteristics, and then creates an auto-equalizer curve based on that information.

operations

versed.

This unit features a function that automatically switches to the rear view camera video (REAR VIEW CAMERA IN) when a rear view camera is installed on your car and the gear shift is moved to the REVERSE (R) position.(For more details, consult your dealer.)

!After you set up the rear view camera set- ting, move the gear shift to REVERSE (R) and confirm that the rear view camera video is shown on the display.

!Change this setting if the display switches to the rear view camera video by error while you are driving forward.

!To stop watching the rear view camera video and return to the source display, press and hold MENU/.

!Touch the RearView source icon to display the rear view camera image while driving. Touch the source icon again to turn the rear view camera off. For details, refer to Se- lecting a source using the touch panel keys on page 11.

1 Display the system menu.

Refer to Introduction of menu operations on page 54.

2Touch Camera Polarity on the system menu to select the appropriate setting.

!Battery – When the polarity of the con- nected lead is positive while the gear shift is in REVERSE (R) position

WARNING

As a loud tone (noise) may be emitted from the speakers when measuring the car's interior acoustic characteristics, never perform auto EQ while driving.

CAUTION

!Thoroughly check the conditions before per- forming auto EQ as the speakers may be da- maged if these functions are performed when:

—The speakers are incorrectly connected. (For example, when a rear speaker is con- nected as a subwoofer output.)

—A speaker is connected to a power amp de- livering output higher than the speaker’s maximum input power capability.

!If the microphone is placed in an unsuitable position the measurement tone may become loud and measurement may take a long time, resulting in battery drainage. Be sure to place the microphone in the specified location.

En 65