Menu operations
7 Touch Start to start auto EQ. | Entertainment settings | |
8 When the | Selecting the illumination color | |
get out of the car and close the door within | This unit is equipped with | |
10 seconds. | ||
mination. | ||
A measurement tone (noise) is emitted from | ||
| ||
the speakers, and auto EQ measurement be- | Direct selection from preset | |
gins. | ||
When auto EQ is completed, Complete is dis- | illumination colors | |
played. | You can select an illumination color from the | |
When the car’s interior acoustic characteris- | ||
color list. | ||
tics cannot be measured correctly, an error | ||
| ||
message will be displayed. (Refer to Under- | 1 Display the entertainment menu. | |
Refer to Introduction of menu operations on | ||
# It takes about nine minutes for auto EQ mea- | ||
surement to be completed when all the speakers | 2 Touch Appearance. | |
are connected. | ||
# To stop auto EQ, touch Stop. | 3 Touch Illumination and then touch a | |
# To cancel auto EQ measurement mode during | ||
color on the list. | ||
this procedure, touch the following touch panel | ||
| ||
key. | Customizing the illumination color | |
| ||
|
Section
14
operations Menu
Canceling auto EQ measurement mode.
9Store the microphone carefully in the glove compartment or another safe place. If the microphone is subjected to direct sun- light for an extended period, high tempera- tures may cause distortion, color change or malfunction.
Note
Do not press h (eject) to open or close the panel when you are using the microphone.
1Display the entertainment menu. Refer to Introduction of menu operations on page 54.
2Touch Appearance.
3Touch Illumination and then touch Custom.
4Display the customizing menu.
Displaying the customizing menu.
5Touch the color bar to customize the color.
6Touch c or d to
7Touch the icon and hold to store the customized color in the memory.
|
|
| Memo | Storing the customized color in |
|
|
| ||
|
|
|
| the memory. |
|
|
|
|
|
|
|
|
|
|
En 
67