Connecting the Units
Connecting and installing the optical cable connection box
WARNING
•Avoid installing this unit in locations where the operation of safety devices such as airbags is pre- vented by this unit. Otherwise, there is a danger of a fatal accident.
•Avoid installing this unit in locations where the operation of the brake may be prevented. Otherwise, it may result in a traffic accident.
•Fix this unit securely with the velcro tape or lock tie. If this unit is loose, it disturbs driving stabili- ty, which may result in a traffic accident.
CAUTION
•Install this unit using only the parts supplied with this unit. If other parts are used, this unit may be damaged or could dismount itself, which leads to an accident or other problems.
•Do not install this unit near the doors where rain- water is likely to be spilled on the unit. Incursion of water into the unit may cause smoke or fire.
Connecting the optical cable
1.Connect the optical cable and ground lead to the main unit.
Connect the optical cable so that it does not protrude from the unit, as shown in the illustration. Fasten the ground lead to the protrusion on the back of the unit.
Optical cable
Installing the optical cable connection box
•When installing the optical cable connection box with the velcro tape.
Install the optical cable connection box using the velcro tape in the ample space of the console box.
Velcro tape (hard)
Velcro tape (soft)
•When installing the optical cable connection box with the lock tie.
Wrap the optical cable and connection box with the protection tape and fasten with the power code using the lock tie.
Screw
Wrap with the protection tape
2. Connect the optical cable to the optical cable connection box.
Fasten with the lock tie
9
<CRD4215-A> 10
ENG/MASTER 96 INST
