Installation
2.Install the unit into the dash- board.
Insert the mounting sleeve into the dashboard. And then secure the mount- ing sleeve by using a screwdriver to bend the metal tabs (90°) into place.
Dashboard
182
53 | Rubber bush |
| |
| Screw |
Mounting sleeve
Side bracket 
Screw (2 mm ⋅ 3 mm)
DIN Rear-mount
1.Determine the appropriate posi- tion where the holes on the bracket and the side of the unit
match.
*1 Use binding screws (4 mm ⋅ 3 mm) only.
*1
*1
•When installing in a shallow space, use the following screw holes. In this case, stick concealing tape on parts that protrude from the dash- board.
*1
*1
Concealing tape
13
<CRD4215-A> 14
ENG/MASTER 96 INST
