DIN Front-mount

Installation with the rubber bush

1.Decide the position of the side brackets. (Fig. 13)

When installing in a shallow space, change the position of side brackets. In this case, stick conceal tape on parts that protrude from the dashboard.

Conceal tape

Side bracket

Flush surface screw (5 6 mm)

Fig. 13

2.Install the unit into the dash- board. (Fig. 14)

After inserting the holder into the dashboard, then select the appropriate tabs according to the thickness of the dashboard material and bend them. (Install as firmly as possible using the top and bottom tabs. To secure, bend the tabs 90 degrees.)

Dashboard

182

53

Rubber bush

 

 

Screw

Holder

Side bracket

Screw (2 3 mm)

After installing the unit into the dashboard, reattach the frame.

Fig. 14

English

Español

Português (B) Français Italiano

Nederlands

14

Page 15
Image 15
Pioneer AVH-P7550DVD installation manual DIN Front-mount, Installation with the rubber bush