Understanding auto TAand EQ error messages

Whencorrect measurement of car interior acoustic characteristics is not possible using the auto

TAand EQ, an error message may appear on the display. If an error message appears, refer to the

tablebelow to see what the problem is and the suggested method of correcting the problem. After

checking,try again.

Message Cause Action
Errorcheck MIC Microphoneis not connected. Plugthe supplied microphone securely into
thejack.
Errorcheck front SP,Error
checkFL SP,Errorcheck FR SP,
Errorcheck center SP,Error
checkRL SP,Errorcheck RR SP,
Errorcheck subwoofer
Themicrophone cannot pick up the
measuringtone of a speaker.
!Confirmthat the speakers are connected
correctly.
!Correctthe input level setting of the power
ampconnected to the speakers.
!Setthe microphone correctly.
Errorcheck noise Thesurrounding noise level is too
high.
!Stopyour car in a place that is as quiet as
possible,and switch off the engine, air condi-
tioneror heater.
!Setthe microphone correctly.
Additional Information
En
100
Appendix