Pioneer AVH-P7600D Setting the clock, Setting the automatic open function

1 TouchA.MENU and SETUP and then
touchBACK UP CAMERA.
2 Touchato turn rear view camera set-
tingon.
#Toturn rear view camera setting off, touch b.
3 Touchcor dto select an appropriate
settingfor polarity.
Eachtime you touch cor dit switches be-
tweenthe following polarity:
!BATTERYWhen the polarity of the con-
nectedlead is positive while the gear shift
isin REVERSE (R) position
!GNDWhen the polarity of the connected
leadis negative while the gear shift is in
REVERSE(R) position
Setting the clock
Usethese instructions to set the clock.
!Whenthis unit is turned on,time is dis-
playedon the entertainment clock only.
(Referto Switching the background display
onpage 95.)
1 TouchA.MENU and SETUP and then
touchCLOCK ADJUST.
2 Touchcor dto select the segment of
theclock display you wish to set.
Eachtime you touch cor dit will select one
segmentof the clock display:
HourMinute
Asyou select segments of the clock display
thesegment selected will be highlighted.
3 Touchaor bto set the clock.
Eachtime you touch ait increases the se-
lectedhour or minute. Each time you touch b
itdecreases the selected hour or minute.
Notes
!Youcan match the clock to a time signal by
touchingJUST.
Ifthe minute is 0029, the minutes are
roundeddown. (e.g., 10:18 becomes
10:00.)
Ifthe minute is 3059, the minutes are
roundedup. (e.g., 10:36 becomes 11:00.)
!Youcan display the clock for eight seconds by
pressingFLIP DOWN/CLOCK when the LCD
panelis closed.
!Evenwhen the sources are off, the clock dis-
playappears on the display.
Setting the automatic open
function
Toprevent the display from hitting the shift
leverof an automatic vehicle when it is in P
(park)position, or when you do notwish the
displayto open/close automatically, you can
setthe automatic open function in the manual
mode.
1 TouchA.MENU and SETUP and then
touchAUTO FLAP.
Other Functions
En 93
Section
18
OtherFunctions