23
Installation
ENG/MASTER 96 24
Parts supplied
When installing the antenna inside the vehicle (on the rear shelf)

Affix the metal sheet on as level a surface as possible where the GPS antenna faces outside

the window. Place the GPS antenna on the metal sheet. (The GPS antenna is fastened

with its magnet.)

Note:
When attaching the metal sheet, do not cut it into small pieces.
Some models use window glass that does not allow signals from GPS satellites to pass through. On
such models, install the GPS antenna on the outside of the vehicle.
MetalSheet
Peeloff the protective sheet
onthe rear.
GPSantenna
Makesure the surface is
freeof moisture, dust,
grime,oil, etc., before
affixingthe metal sheet.
Note:The metal sheet
containsa strong adhesive
which may leave a mark on
the surface if it is removed.
Clamps
Useclamps to secure the
leadwhere necessary inside
thevehicle.
Waterproof padClamp (5 pcs.)Metal sheetGPS antenna
CRD3914A_inst_001_030_Eng 5/11/04 4:40 PM Page 24