2 Press [u] C.
Turn on the power of this unit.
3 Press [PC] G.
The [CONNECTED] screen appears on the main unit display.
!The message [Installing device driver software] may appear when the
!When installing on Windows XP
—[Can Windows connect to Windows Update to search for software?] may appear while the installation is in progress. Select [No, not this time] and click [Next] to continue with the installation.
—[What do you want the wizard to do?] may appear while the installation is in progress. Select [Install the software auto- matically (Recommended)] and click [Next] to continue with the installation.
—If [Hardware Installation] appears on the screen while the installation is in progress, click [Continue Anyway] and con- tinue with the installation.
Adjusting the buffer size
This unit functions as an audio device conforming to the ASIO standards.
!If an application using this unit as the default audio device (DJ software, etc.) is running, quit that application before adjusting the buffer size.
Click Windows [START] menu >[All Programs]>[Pioneer]> [Pioneer CDJ]>[Pioneer CDJ ASIO Settings Utility].
!A sufficiently large buffer size decreases the chance of sound dropout (sound interruption) but increases audio signal transmis- sion delay (latency).
Checking the version of the driver software
Click Windows [START] menu >[All Programs]>[Pioneer]> [Pioneer CDJ]>[Pioneer CDJ Version Display Utility].
!You can check the firmware version of this unit on the screen.
!The firmware version is not displayed when the
Checking the latest information on the driver software
For the latest information on the driver software for exclusive use with this unit, visit our website shown below. http://www.prodjnet.com/support/
12En