
|
| Fault Codes |
|
|
|
| Code | Description and Remedy |
|
|
|
|
|
|
| An LDAP server protocol error occurred in the address book operation. The | |
|
| server returned the RFC2251 specification protocol error 94 (result no longer |
|
| available) during the address book query. Check the LDAP server status. |
|
|
|
| An LDAP server protocol error occurred in the address book operation. The | |
|
| server returned the RFC2251 specification protocol error 95 (result still |
|
| available) during the address book query. Check the LDAP server status. |
|
|
|
| An LDAP server protocol error occurred in the address book operation. The | |
|
| server returned the RFC2251 specification protocol error 96 (client loop |
|
| detected) during the address book query. Check the LDAP server status. |
|
|
|
| An LDAP server protocol error occurred in the address book operation. The | |
|
| server returned the RFC2251 specification protocol error 97 (maximum number |
|
| of reference hops exceeded) during the address book query. Check the LDAP |
|
| server status. |
|
|
|
| The number of print pages for the Booklet Creation job exceeded the number of | |
|
| maximum pages. Reduce the print pages or disable the Booklet Creation |
|
| feature. |
|
|
|
| The selected option (i.e., paper size, paper tray, output tray, or | |
|
| printing) is incompatible with the specified paper type. Check the print |
|
| parameters. |
|
|
|
| An invalid print parameter combination was set. Check the print parameters. | |
|
|
|
| In Bates Stamping settings, the number of digits specified in [Number of Digits] | |
|
| does not match the value specified in [Starting Number]. For details on these |
|
| settings, refer to the Annotation feature in the Copy chapter of the User Guide. |
|
|
|
| Refer to | |
|
|
|
| An error occurred in the bypass tray. Check the document size, orientation and | |
|
| paper type, and then try executing the same operation again. |
|
|
|
| A protocol which is not supported on the machine was received from the LDAP | |
|
| server during the address book query. Try executing the same operation again. |
|
| Contact the Xerox Welcome Center if the problem persists. |
|
|
|
| The number of address book queries exceeded the handling capacity of the | |
|
| machine. Wait a while, and perform the same operation again. If there was only |
|
| one address book query, the problem may be in the machine software. Contact |
|
| the Xerox Welcome Center. |
|
|
|
| The number of transactions from the LDAP server exceeded the handling | |
|
| capacity of the machine. Wait a while and perform the same operation. Contact |
|
| the Xerox Welcome Center if the problem persists. |
|
|
|
| A communication error occurred. If another error message is displayed, clear | |
|
| the problem first. If the control panel is being used by a user, wait until the user |
|
| operation is completed. If the machine is communicating with a remote device, |
|
| wait until the communication is completed. |
|
| If the problem persists even after you take the above actions, switch off the |
|
| machine, and then switch it on again. If the problem still persists, contact the |
|
| Xerox Welcome Center. |
|
|
|
| The auto stateless IPv6 address 1 of the machine is duplicated on the network. | |
|
| Change the auto stateless IPv6 address 1 of the machine, or the address of the |
|
| other device. |
|
|
|
403